| Brand: | Atakale |
| Product Code: | Pack 100AH 25.6V |
| Reward Points: | 550 |
| SKU : | Pack 100AH 25.6V |
| Dimension | 500km | 750km | 1000km | +++ |
|---|---|---|---|---|
| Box-Shippment | 1day | 2 day | 3 day | 5 day |
| By Truck | 3 day | 4 day | 5 day | 7 day |
Tags: Custom Design lifepo4, turkish lifepo4, 100AH 24V lifepo4 shrink Tube
If LiFePO4 batteries are not fully discharged, they do not need to be charged after each use. LiFePO4 batteries do not get damaged when left in a partial state of charge (PSOC). You can charge your LiFePO4 batteries after each use or when they have been discharged up to 80% DOD (20% SOC). If the Battery Management System BMS) disconnects the battery due to low voltage (voltage will be <10V), remove the load and charge immediately using a LiFePO4 battery charger.
LiFePO4 batteries can be safely charged between 0°C to 45°C (32°F to 113°F). LiFePO4 batteries do not require temperature compensation for voltage when charging at hot or cold temperatures. All Canbat LiFePO4 batteries come with an internal BMS that protects the battery from low and high temperatures. If the BMS disconnects due to low temperature, the battery must warm up for the BMS to reconnect and accept the charging current. If the BMS disconnects because of high temperature, the battery will need to cool down before the BMS will accept charging the battery. Please refer to your specific battery’s datasheet for the BMS low temperature and high-temperature cut-off and reconnect values.
The charging and discharging temperature for lithium batteries from our LT series is -20°C to 60°C. Canbat Low Temperature (LT) Lithium Batteries are cold-weather rated, designed for Canada’s cold climates. These batteries have a built-in heating system featuring proprietary technology that draws power from the charger. No additional components are required. The entire process of heating and charging is completely seamless. The heating system automatically activates once charging below 0°C is attempted, and it automatically deactivates when it’s no longer needed. The heating system does not take power from the battery, but rather from the charger, ensuring the lithium battery is not discharging itself and keeping you powered. Simply plug the LT lithium battery into the LiFePO4 charger and the internal heating and monitoring systems take care of the rest.
Most lead-acid battery chargers can be used with LiFePO4 batteries as long as they are within the appropriate voltage guidelines. AGM and Gel algorithms typically fall within the LiFePO4 voltage requirements. The voltage for flooded battery charging algorithms is often higher than LiFePO4 charging requirements, which will result in the BMS disconnecting. If this happens, it is generally good practice to replace your charger for one with a LiFePO4 charge profile. Since the BMS protects the battery, using lead-acid chargers will typically not damage the battery.
Note that if the BMS disconnects due to low voltage, a lead-acid battery charger may not be able to reconnect the BMS, even if the charger has the acceptable charging parameters to charge LiFePO4. This is because when the BMS disconnects, the lithium battery will not have a voltage as it will read 0V on a voltmeter, while lead-acid chargers require the battery to read out a voltage to start charging. If the battery is reading 0V, the lead-acid battery charger will not be able to understand that a battery is connected and that it should start charging. This is also true for some low-quality lithium chargers. It is always recommended that you invest in a high-quality LiFePO4 charger to ensure high performance and longevity. Feel free to contact Canbat should you have any questions.
When connecting LiFePO4 batteries in parallel, please make sure each battery is within 0.1V of each other before putting them in service, This will minimize the chance of imbalance between batteries. If you’re charging 12V LiFePO4 batteries, the charging voltage should be between 14V – 14.2V. When charging 24V batteries in parallel, the charging voltage should be 28V – 28.4V. Charging 36V lithium batteries in parallel requires a voltage of 42V – 42.6V. Finally, charging 48V LiFePO4 batteries require voltage parameters of 56V – 56.8V. Below is a table with a summary showing the voltage requirements for each system voltage.
| System Voltage | Charging parameters |
| 12V | 14V – 14.2V |
| 24V | 28V – 28.4V |
| 36V | 42V – 42.6V |
| 48V | 56V – 56.8V |
The voltage parameters apply to both charging profiles CC and CC-CV. If your charger’s voltage is lower than those listed in the table, it will not damage your battery, but it will be undercharged, and it will not provide the full rated capacity of the battery. If your charger’s voltages are higher than those listed in the tables above, the BMS may disconnect the battery and you may have to remove the load to reconnect. We recommend you replace the charger to avoid this inconvenience and to invest in a high-quality LiFePO4 battery charger.
When connecting batteries in series, please make sure each battery is within 50mV (0.05V) of each other before putting them in service. This will minimize the chance of an imbalance between batteries. If your batteries get out of balance, the voltage of any battery is >50mV (0.05V) from another battery in the set, you should charge each battery individually to rebalance. You can charge each battery individually periodically to avoid imbalance. When charging LiFePO4 batteries in series, it is best to use a multi-bank charger that charges each battery individually to ensure the cells remain balanced. You can also use a 24V battery LiFePO4 charger or a 48V battery LiFePO4 charger if you’d like to charge your system as a whole.
Below are the key, typical charger inputs when using an inverter/charger or charge controller for charging LiFePO4 batteries. Many inverter/ chargers require additional parameters, please contact Canbat technical support for assistance. LiFePO4 batteries do not require equalizing. LiFePO4 batteries do not require temperature compensation for voltage when charging at hot or cold temperatures.
| PARAMETER | 12V SYSTEM | 24V SYSTEM | 36V SYSTEM | 48V SYSTEM |
| Bulk Voltage | 14V – 14.6V | 28V – 29.2V | 42V – 43.8V | 56V – 58.4V |
| Absorption Voltage | 14V – 14.6V | 28V – 29.2V | 42V – 43.8V | 56V – 58.4V |
| Absorption Time | 0- 6 min | 0- 6 min | 0- 6 min | 0- 6 min |
| Float Voltage | 13.8V ± 0.2V | 27.6V ± 0.2V | 41.4V ± 0.2V | 55.2V ± 0.2V |
| Low Voltage Cutoff | 11V | 22V | 33V | 44V |
| High Voltage Cutoff | 14.6 | 29.2V | 43.8V | 58.4V |
Depending on the quality of the alternator, it may work fine to charge LiFePO4 batteries without modifications. However, low-quality alternators with poor voltage regulation can cause the BMS to disconnect LiFePO4 batteries. If the BMS disconnects the batteries the alternator may be damaged. To protect your LiFePO4 battery and alternator, please be sure to use a compatible high-quality alternator or install a voltage regulator. You can also use a DC to DC charger to safely and effectively charge your batteries including house banks. Installing a DC to DC charger is the recommended option when it comes to charging lithium with an alternator.
If you are using a voltage-based fuel gauge that is designed for lead-acid batteries, it will not accurately measure the state of charge (SOC) of LiFePO4 batteries. Please replace your fuel gauge with one that measures current rather than voltage to accurately measure the state of charge of lithium iron phosphate batteries.
If you have any technical questions, please contact Canbat Technical Support at +1 778-358-3925.
Yes, you can charge Canbat lithium batteries with solar panels. In fact, you can charge them with any type of charging equipment, as long as the charging voltage is within 14V to 14.6V for our 12V LiFePO4 batteries.
Yes, but it is recommended to invest in a DC to DC charger to protect your LiFePO4 battery and alternator.
Most lead-acid battery chargers can be used with LiFePO4 batteries as long as they are within the appropriate voltage guidelines. AGM and Gel algorithms typically fall within the LiFePO4 voltage requirements. The voltage for wet cell or flooded battery charging algorithms are often higher than LiFePO4 requirements, which will result in the BMS disconnecting the battery at the end of the charge cycle, and may result in the charger displaying an error code. If this happens, it is generally good practice to replace your charger. Since the BMS protects the battery, using lead-acid chargers will not damage the battery.
LiFePO4 batteries can safely charge between 0°C to 45°C (32°F to 113°F). If your application requires you to recharge in freezing temperatures, Canbat Low Temperature series (LT) can be recharged between -20°C to 45°C (-4°F to 113°F). The LT series has a built-in heating system featuring proprietary technology that draws power from the charger itself. No additional components are required. The entire process of heating and charging is completely seamless. The heating system automatically activates once charging below 0°C is attempted, and it automatically deactivates when it’s no longer needed. The heating system does not take power from the battery, but rather from the charger, ensuring the battery is not discharging itself. Simply plug the battery into the lithium charger and the internal heating and monitoring systems take care of the rest.
The short answer is no. In order to fully charge a 12V LiFePO4 battery, a charger with a voltage of 14V to 14.6V is required. Most AGM battery chargers are within that range and they would be compatible with Canbat lithium batteries. If you have a charger with a lower voltage, it may still charge the battery, but it won’t charge it to 100%. A charger with a higher voltage would not charge the battery and the BMS would enter protection mode due to its high voltage disconnect feature. Although many AGM battery chargers are compatible with LiFePO4, wet cell or flooded battery chargers are not compatible as they typically charge at a higher voltage.
Canbat LiFePO4 batteries can be discharged up to 100% of their capacity. However, to optimize the performance of your LiFePO4 battery, to achieve a higher cycle life, and to avoid the BMS disconnecting the battery, we recommend limiting the discharge to 80%. If the BMS disconnects the battery due to low voltage, at 100% depth of discharge, remove the load and recharge using a LiFePO4 charger to reactivate the BMS.
LiFePO4 batteries can safely discharge between -4°F to 140°F (-20°C to 60°C). All Canbat LiFePO4 batteries come with a built-in BMS that protects the battery from low-temperatures and high-temperatures. If the BMS disconnects due to cold or high temperature, wait until the temperature is more suitable and the BMS will reconnect automatically.
It is recommended to store LiFePO4 batteries at about 50% state of charge (SOC). If the batteries are stored for long periods of time, cycle the batteries at least every 6 months. Do not store batteries that are discharged. They do not require a trickle charger. · Recommended storage temperature: -5 to +35°C (23 to 95 °F) · Storage up to 1 month: -20 to +60°C (4 to 140 °F) · Storage up to 3 months: -10 to +35°C (14 to 95 °F) · Extended storage time: +15 to +35°C (59 to 95 °F) It is highly recommended to store lithium batteries indoors during the offseason.
Yes, you can connect up to four 12V batteries of the same model in series to obtain a higher voltage. Do not connect lithium batteries in both parallel and series simultaneously. Please note that the 24V lithium batteries are designed for 24V applications and do not support series connections. Likewise with the 36V and 48V lithium batteries. When charging LiFePO4 batteries in series, it’s recommended to use a multi-bank battery charger that can charge each battery individually. If that’s not an option, you can also use a 24V battery LiFePO4 charger or a 48V battery LiFePO4 charger if you’d like to charge your system as a whole. Canbat lithium batteries support charging in series.
Yes, you can connect up to four 12V batteries of the same model in parallel to obtain a higher capacity. Do not connect lithium batteries in both parallel and series simultaneously. Canbat 24V and 36V lithium batteries also support up to 4 units in parallel. Canbat 48V LiFePO4 batteries support up to 14 units in parallel as they are designed for larger projects. Canbat lithium batteries support charging in parallel.
Yes, Canbat LiFePO4 batteries can be installed upright or on their sides. Please fasten the battery if installed in a moving vehicle, such as in an RV or a boat. Please also avoid placing anything over the battery, and it’s recommended to cover the terminals with a plastic cap to prevent an external short circuit.
Yes, LiFePO4 is a safe chemistry and the most stable lithium-type battery on the market. Canbat lithium is UL 1642 certified, which means they have been tested for short-circuit, abnormal charging, crush, impact, shock, vibration, heating, temperature cycling and pressure. All Canbat LiFePO4 batteries come with an internal Battery Management System. The BMS protects against
If you already have a lead-acid or a LiFePO4 charger and you want to make sure it’s compatible, chat with one of our battery experts. We can check your charger’s user manual and confirm the voltage parameters. Canbat offers Canada-based 24/7 chat support to all its clients.
Custom Design Lithium Shrink Battery Pack rechargeable 12V 24V 36V 48V 60V 72V 18650/32700 Li Ion/LFP lithium battery pack.Atakale has the capability to custom design a Lithium Ion battery pack to fit your product’s specific needs. From small single-cell packs to large battery packs, Atakale can design safe and reliable solutions to meet your specifications. Atakale prides itself on using only the highest quality cells to make Lithium Ion battery packs. Atakale takes the utmost care to ensure that all batteries meet the highest safety standards prior to leaving our facility. See our Test Report for more information. The factory is certificated with ISO 9001, And batteries with UL, UN 38.3And IEC62133, MSDS.
| Features | LFP Battery Sepecification |
| Battery Capacity | 100AH |
| Battery Voltage | 8S 25.6Volt |
| BMS | No Communication,Active balance, 8S, 100AH Charge, 200A Decharge |
| Dimension/Weight | 209 WithX 206Lenght X 164(Height) mm 9,45kg |
| Cell Sequence | 32700-6000mah - 16x8(128 pcs) |
| Specifications | Large-scale electric vehicles,electric bus, electric car, E-Tour Car,e-bike, e-scooter,e-motorcycle, electric golf cart, e-wheelchair,electric drill, electric saw, lawn mower,Remote control cars, boat, aircraft, toys,Solar and wind power generation energy storage devices, Telecom base Station,Small medical equipment and portable equipment |
1. Li-ion cylindrical battery18650/32700 prysmatic battery cells can be easily assemblied to large capacity batttery pack or individually used for consumer electronics etc.Lithium polymer pouch cell Lithium polymer battery has higher safety factor.
2. Communication of monitored data via Battery Management System(BMS) ,built-in automatic protection for over-charge,over-discharge and over-temperature conditions, Short circuit protection, over-current protection,over-load protection, over-discharge protection, inversely-connection protection, temperature control, balance, fuse, thermistor, etc.
3.Maintenance free.
4.Internal cell balancing.
5.Thousands of cycles,100% DOD,under normal conditions.
6.Flame retardant plastics.
Features/Advantage:
1. Ideal drop-in replacement for lead-acid batteries.
2. Longer cycle life than other lithium-ion batteries.
3. Good high-temperature resistance.
4. No memory effect
5. Lighter weight compared with same size lead acid battery
6. IP65 waterproof ratings. Suitable for marine use.
7. Environmental friendly.
8. High density of energy. Light weight.
9. Low self-discharge. Low internal resistance.
10. No Mercury, No fire, No explosion, No leakage.
Application:
1. Large-scale electric vehicles: electric bus, electric car, E-Tour Car
2. Light electric car: e-bike, e-scooter,e-motorcycle, electric golf cart, e-wheelchair
3. E-tool: electric drill, electric saw, lawn mower and so on
4. Remote control cars, boat, aircraft, toys
5. Solar and wind power generation energy storage devices, Telecom base Station
6. Small medical equipment and portable equipment
Atakale is a professional produce on electric scooter, electric drive, two wheel of electric scooter, electric bicycle, lithium batteries, lithium electricity mobile phone chargers, lithium battery car Auto emergency starter, outdoor mobile power bank products such as research and development, productions, sales and service as one of the technology-based manufacturing company.
Anhui Junwei Electric Bicycle Co.,Ltd has been innovating and forging ahead in practice in terms of quality control, the company strictly adopts international standards, national standards and industry standards to produce the main parts and production process of lithium battery pack.
Atakale TURKEY. was founded in a small workshop to produce starter battery plates, and today has become an international brand, occupying a total area of 1.000 m².In 1993, Akusan started to produce ebonite type starter battery and its first batteries are used as OEM battery of Turkish Ford Factory. Since 1993, AtakaleInc. is using its modern plant to produce battery components, in "East Industrial Zone" of Kayseri, has accelerated its growth in certain steps to be an international firm and a demanded brand.
Atakale is a lithium iron phosphate battery produced by Atakale company with domestic BMS and using cylindrical and prismatic cells. Atakale Battery Industry Inc. ,Moduled Electronics Inc. , and B-het Engineering , Atakale Energy is Turkey's leading Lithium Battery manufacturing company and operates in various sectors, primarily LiFePO4 Technology and GES Services, through its subsidiaries and affiliates. Atakale Energy is registered in Turkey and its head office is Ankara is Turkey.
There are two types of products produced by Atakale . It is in the form of a standard battery with an ABS plastic openable box and mounted in a metal box. There is a battery voltage indicator and terminal terminal connections on the product with Lifepo4 cells installed in the sheet metal box. It is easily opened and serviceable. It is made with cylindrical or prismatic cells. There is no BMS communication. BMS is suitable for parallel connection. However, there is no communication and balancing charging equipment required for serial connection.
It has 20mohm internal resistance. It has a continuous charge and discharge current value of 30A.
The aim of Atakale energy is to coordinate and support the finance, strategy, business development, legal, human resources and sustainability functions in order to ensure that the Group companies operate in a profitable and sustainable manner with favorable competitive conditions; At the same time, it is to determine and follow the corporate management practices applicable throughout Atakale Energy.
For areas without city electricity, the battery pack can be charged by solar panels and used for night lighting; For areas where city electricity is expensive, the battery pack can be charged in the electric valley value period and used in the peak power period; In areas where power is cut from time to time, the battery pack can be used as a UPS to prevent loss of information due to sudden power cuts.
Use UU 12-100 to avoid purchasing high-cost electricity. Use solar energy to power your home and reduce your dependence on the grid. Unlike generators, UU 12-100 need no maintenance, no fuel consumption, and no noise, make your home lights always on, home appliances always run.
For no city power areas, the battery pack can be charged by solar panels and used for night lighting; For the areas that city power is expensive, the battery pack can be charged during the electricity valley value period, and used at the peak power period; For the areas which power off from time to time, the battery pack can be used as UPS, to avoid information loss caused by sudden power outage.
Shandong Blue Carbon Technology Inc. designs, manufactures and markets solar module products for residential, commercial and industrial application worldwide. Our product line consists of superior portable solar chargers, solar water pumps, solar air conditioners and utility on-grid systems.We put customers' needs in the first place, and we are devoted to progress, innovation and ethical choices. Solar energy is related with empowerment, and that's something we take very seriously. Blue Carbon Technology Inc. is a customer-centric company. From pre-purchase decision making to technical support, we are renowned for our first turnaround time and expert advice.Our mission is to deliver innovative photovoltaic technologies for building integration to generate renewable solar electric power. Our hope is to secure the health of our planet for future generation by transforming our infinite supply of sunshine into a practical energy for humanity, with a keen focus on research.
-The battery pack is applicable to commercial lighting, industrial lighting, home lighting, outdoor lighting, camping tourism, farming, planting, the night market stalls, etc.
-All in one mould design and production, easy to install.
-With longer span life LiFePO4 battery,over 12 years lifespan, ensure the whole set products’life span.
-High quality aluminium magnesiumalloy, anti-corrosion, substantial, durable, artistic, practical. High craft manifesting production value of famous brand.
-Dustproof structure d esign, DC output, safe and reliable.
-Integrated packaging, safe and convenient to transport.
Volumetric Energy Density increased by 23.5% LED power display screen and switch buttons Rugged stainless steel body ensures 5year warranty High protection level IP65 Support 1C charge /discharge and excellent heat dissipation design Quick connection and insulation protection Stainless steel handles guarantees 2000 fatigue tests supports four external connections in series with voltage up to 51.2V
Atakale one of Turkey's energy and battery importers and manufacturer . Atakale distributes and wholesales lifepo4 batteries of China's lifepo4 cell Manufacturer Company.
Atakale Rechargeable lithium iron phosphate batteries have the Un38.3 transport safety certificate. The most important advantage is that 4 batteries can be connected in series without the need for any BMS, balancing charge control unit. In addition, batteries can be connected in parallel with each other in the 100mV difference range.
It detects short circuit and overcharge in 1 seconds and protects the battery. The delay time does all the protection operations in 300 microseconds. It can work up to 65ºC without damage. It is one of the most prestigious and affordable Chinese brands sold in Turkey.
Atakale is committed to becoming a first-class supplier of Li-ion power battery and LFP ESS. Blue Carbon's core management and R&D team has been engaged the clean energy business for more than 20 years. Our mission is to promote the use of clean energy and ultimately achieve carbon neutrality. So far, more than 1 thousand Atakale products are being used by users around the world, and more than 3MWh clean energy has replaced fossil energy . We use the most stringent quality management, independent production of modules, PACK, BMS and systems, and deliver products with high quality and low cost a timely manner to achieve our commitment to environmental protection and a green earth.
For no city power areas, the battery pack can be charged by solar panels and used for night lighting; For the areas that city power is expensive, the battery pack can be charged during the electricity valley value period, and used at the peak power period; For the areas which power off from time to time, the battery pack can be used as UPS, to avoid information loss caused by sudden power outage.
The battery pack is applicable to commercial lighting, industrial lighting, home lighting, outdoor lighting, camping tourism, farming, planting, the
night market stalls, et
2. Benefits fromPeak Shaving
House: Load Shifting Store the power during low-peak andusetheenergy at peak-time. Save the money which happens arising from peak rate. Transmission&Distribution: peak ShavingSave on the electricity bills by reducing peak demand
3. VPP Revenue
Enabling a cost reduction, as well as boosting the system’s efficiency
■ Volume: The capacity of LiFePO4 battery is bigger than lead- acid cell, with the same volume,it is double of Lead-acid battery.
■ Weight: LiFePO4 is light. The weight is just 1/3 of lead-acid cell with the same capacity.
■ Volume: The capacity of LiFePO4 battery is bigger than lead- acid cell, with the same volume,it is double of Lead-acid battery.
■ No memory effect: No matter the LiFePO4 Battery is in which conditions, it can be charged and discharged whenever you like, no need to discharge totally then charge for it.
■ Durability: The durability of LiFePO4 Battery is powerful and consumption is slow. The time ofcharging and discharging is more than 2000times. After 2000times circulation, the capacity ofthe battery is still more than 80%.
■ Security: LiFePO4 battery passed the strict safety testing, with higher safety performance.
■ Environmental protection: Lithium materials not have any poisonous and harmful substance.lt is regarded as green and environmental protection battery. The battery has no any pollution no matter in the process of production or in the process of using.
Well graded and combination. After multi-selection, to ensure each cell qualified with long life. The connection tech of all interface, be safe and durable, with simple maintenance. Multi-layer protection structure, could be waterproof, shockproof, anti explosion and fire. Various joints, could be customized, safe and durable for long run. Security and reliability, compared with lead-acid battery, the materials of LiFePO4 is the securest, the best choice of solar energy storage battery.
Product Warranty
The products warranty period is five (5) years from the sales date as mentioned in the Seller's invoice to the End User("Invoice Date”) or 2000 cycles 80% DOD !"!whichever comes first.
This Warranty period covers a capacity equivalent to 1 cycle per day. Cycle:Discharge the nominal capacity of a charged battery and charge it afterwards. Regarding Self-discharging degradation, 180 days after ex-work is ensured.
In the case of non-artificial damage to the housing, display screen, handles and power terminals, Blue Carbon shall replace them for free within one year.
Under this Warranty, Blue Carbon is responsible for either battery replacement or battery repair. The Period of Performance Guarantee will continue on any repaired unit. In the event of a replacement units then the Period of Performance guarantee will transfer to the replacement unit.
Inno event will Blue Carbon be liable for any consequential, incidental or punitive damages (including without limitation of loss of profit, harm to goodwill or business reputation, or delay damages) arising from or out or the Product or its installation, use, performance or non-performance, or any defect or breach of warranty, whether based on contract, warranty, negligence, strict liability, or any other theory. Blue Carbon's aggregate
liabilities, if any, in damages or otherwise, shall not exceed the purchase price paid by the Original Buyer for the product.
| Battery Comparison Criteria | LifePo4 Battery | Jel/AGM/Opzs Lead Acid Battery |
| Number of Cycles 80% Deep Discharge | 6000 | 600 |
| Efficiency | %96 | %85 |
| Charging time 80% Capacity | 2 Hour | 8 Hour |
| Safe Capacity Usage | %80 | %60 |
| Maintenance Requirement | No | Yes |
| Voltage Stability(%100-%10) | 14V/12.4V | 13V/11.51V |
| weight100AH 12V | 12 kg | 30 kg |
| Operating Temperature (without capacity loss) | -20ºC~ 60℃ | 20ºC ~ 25℃ |
| Impact vibration resistance | Çok iyi | iyi |
| Shelf Life -Calendar Life | 15 Sene | 12 Sene |
| Standby Discharge Rate | %2 | %3 |
| Maximum withstand temperature | 90ºC | 60ºC |
| Require Special Charger | No | No |
| Cell Voltage | 3.2V | 2V |
| Output power Stability 90% discharge | Fixed | Variable |
| Instant Maximum Discharge Current 100AH | 300aH | 300AH |
| Maximum Charge Current At Empty | 100Ah | 30AH |
| 1 Hour Discharge Capacity | 90Ah | 59AH |
| Maximum Guarantee Given | 12 Sene | 2 Sene |
| Protection | BMS/Elektronik | Koruma Yok |
| How long has it been used | 1996/( 2017 populer) | 1950/(1970 populer) |
| Toxic Waste | No | Yes/Lead |
| Recycling | Mo | %100 recycling |
| Repair/Recovery | No | Possbile |
| Serial Parallel Connected | No | Yes |
| Quality Classes | A,B,C Grade | A,B Grade |
| In case of short circuit | Withouth BMS Explasion | Intense gas will be released |
| Can it be transported by plane | Yes(UN3091 UN3481) | YEs |
| Performance below 0ºC | Charge No, Decharge Yes | Charge and Descharge |
| Overcharge | Demaged | Only capacity lost |
| Breakdown | high | Seldom |
Durability | Weak | High |
| Reliability | Weak | High |
| Use of | Dificult | Easy |
| Replace new one | Dificult and high cost | Easy and Cheap |
| Scrap price | No Sale Scrapt | 1USD/kg |
| Battery Electrical Features | |
| Battery Nominal Capacity Ah | 100 |
| Battery Wh Capacity | 2560 |
| Battary Voltage Volt | 24 |
| Battery Types | LifePo4 |
| LifePo4 Battery Type | Battery Pack |
| Battery Cycle Use %80 | 4000 |
| BMS Charge Current Amper | 50 |
| BMS Decharge Current Amper | 100 |
| LifePo4 Paralellel Serial | Parallel |
| LifePo4 Communication | No |
| Battery Internal Resistance mΩ 25°C | 20 |
| Maximum Discharge Current Amper | 200 |
| Absorption Charge Current Amper | 50 |
| Battary Float Voltage Volt | 25.6 |
| Self Descharge 25ºC % | 3 |
| Battery Features | Cable |
| Battery Mechanical Features | |
| Battery Dimension | 209x206x330 mm |
| Battery Weight kg | 18.5 |
| Battery Terminal Type | Cable |
| Battery Certificates | |
| Battery Design Life Years | 10 |
| Battery Made In | China |
| Battery Certificates | ISO,CE |
| Battery Warranty Time | 5 |
| Battery Customer Rate %100 | 85 |
9,220.32₺ 9,624.72₺ Ex Tax: 7,683.60₺
3,356.52₺ 3,437.40₺ Ex Tax: 2,797.10₺
3,356.52₺ 3,437.40₺ Ex Tax: 2,797.10₺
4,610.16₺ 4,448.40₺ Ex Tax: 3,841.80₺
31,947.60₺ 33,160.80₺ Ex Tax: 26,623.00₺
