Solar Panel Roof Tile Hook
High Strength Reliable Design
Fixed solar panels, excellent stability
Galvanized anodized aluminum
Usable for all type pv module rail
It is easy to use install
Reduced Installation Time and Costs
Withstand different wind snow
Custimezed design for all roof type
Roof tile Type
Hook Thickness
Mounting Type
Our ©ISOTILE PRO solar mounting system, which is used as a full-length rail, is compatible with many local and foreign tiles. For example, it can be applied with tiles produced by brands such as ottoman single slotted, Ottoman double slotted, Mediterranean tile and braas.
©ISOTILE PRO mounting hooks used in vertical placement are manufactured from durable stainless steel or centrifugal galvanized ST52 raw material and ©ISOBEAM rails are used.
fixed to purlins or rafters of the roof structure ©ISOTILE PRO tile hooks are available in two different versions.
©ISOTILE PRO Our standard hook is used in regions with low snowfall and is the economic version.
Our ©ISOTILE Pro hook is preferred in regions with heavy snowfall. ©ISOTILE Pro hook does not put a load on the tile due to its special form in case of overhead loads, so it does not break the tile.
Used with ISOBEAM rails and in four different heights With the option, different openings are passed, creates optimum air circulation in hot regions. Our long-lasting tile roof mounting system is covered by a 12-year ISOTEC warranty.
©ISOTILE PRO mounting systems are designed and manufactured based on the snow, wind and earthquake loads specified in EUROCODE standards.
Supplied pre-assembled and can be attached to the mounting rails from the top ©EasyClamp V.1.3 middle clamp 8,0EasyClamp V.1.3 edge clamp sets are compatible with all our systems and accelerate the solar panel assembly process up to .
It brings an additional load of 2.4 — 3.5 kg to 1 square meter roof area and is among our medium light mounting systems.
Usage area: Tile type roofs
Compatihle solar panel sizes:
L: 1550- 2450mm / W: 950 — 1200mm / H: 35 — 45mm
Fixiııg to roof purlins: With Concrete, Steel or VVood screws
Raw materials used: • Rails: AL 6063-T66 / Clamps: AL 6005-T6 Hook : Stainless 304 or SDG ST52 / Fasteners : Stainless A2-70 et Bimetal
Technicial Specifıcations:
Vertical placement is recornmended. If horizontal placement is desired, double cail rails rnay be required.
Length options: 1050 — 6050mm
Height options: 30 — 45 — 60 — 85mm
Especially when I keep in mind that there are dozens of different types of tile height, the Adjustable roof hook will provide you convenience while installing your entire system.
L type tile solar panel mounting apparatus is one piece high strength, and it is specially designed for mounting the rail from the edge, not from the top of the hook.
The most important advantage is that it is easier to mount from the side to the rail on the roof. screw and square nut are easily mounted.
It is specially designed for Potrait /side rail mounting. If you want to lay the rails on the roof in the south-north direction instead of the construction parallel to the roof, the mouth of the roof hook should be accordingly, since you will install the rails from the side and in the south-north direction. The product is specially designed as side mounting.
Tittle bracket can minimize penetration on the roof solar installation, the hooks goes under the tiles and fix to the substructure , usually wooden batten can also customize the brackets to specific roof tiles
Tile Hook can be used for solar mounting system installation on sloped residential flat tile roof or curved (Spanish, S tile) tile roof. The tile hooks are compatible with most common rails and made of 304 stainless steel.
Atakale Mount not only help you determine the best solar mounting solution for solar power project,but also ensure you win the highest investment return and the most efficient of Enjoying Sunshine.
Some features of solar tile roof hook:
1. Lower cost, Incomparable value ;
2. Faster installation, Flexible attachment ;
3. More Perfect Service, Complete technical support ;
4. Certificate support, ensure the high quality.
Brief introduction
Installation site :Pitched tile roof system.
Max Building Height:Up to 65 ft(22m),customized available.
Max Wind:60m/s
Snow Load:1.4KN/m2
Material:Stainless Steel 304
Warranty:12 years warranty, and 25 years life time.
Specification:180*50mm,customized available.
Packing:20pcs for one carton, carton size:0.26*0.21*0.21m
Solar tile hook are applied to solar installation on sloped residential flat roof with or without batten, or curved tile roof without batten. The tile hooks are compatible with most common rails and are made of stainless steel. The height is adjustable to accommodate different types of tile roof installed with or without batten.
Factory directly delivery with fast delivery;
Height fixed or adjustable are available
Wider distance of bolt holes to avoid splitting rafter
5mm thick 30mm wide stainless steel tile hook arm and 4mm thick stainless steel bottom plate Not MOQ require.
The roof hook PLUS offers all the advantages of our BASIC version: twice six drill holes, infinitely variable horizontal adjustability and the diagonal hole at the top. In addition, the plates into which the hooks are inserted are available in different heights. This means that different roof batten heights can be ideally served. The base plates also have - unlike the BASIC version - two instead of one rail per side. This gives you more flexibility vertically when inserting the hooks.
The guide rail can be bent as soon as the hook is in the correct horizontal and vertical position. Even then, the diagonal hole at the upper end of the hook leaves some space for adjusting the structure. Different base profiles (universal profiles) can be mounted vertically on the roof hooks. For example, our TRI-STAND universal profile UP-L or UP-L+. With the help of the innovative SafeClick system, the TRI-STAND insert profiles can then be mounted crosswise without any further screwing
