Shop By Categories
SFS self-tapping  PV Solar Module screws for sandwich panels self-drilling  DTX-S-5,5

SFS self-tapping PV Solar Module screws for sandwich panels self-drilling DTX-S-5,5

Brand:SFS
Product Code: SFS DTX-S-5,5
Reward Points: 1
SKU : SFS DTX-S-5,5
Product available in stock : 29900
  • 3.33₺

    3.42₺   3% off
  • Ex Tax: 2.78₺
  • Price in reward points: 10
  • 1000 or more 3.31₺
  • 1000000 or more 2.87₺
This product has a minimum quantity of 100

The products can be delivered from the factory, Ankara or Istanbul branch. If you are close to the branches of our company, you can check the stock in our unit close to you by contacting us by phone or e-mail.
Shippment Fee :You can order or order shipping cost. Those who cannot get cheap money from our company.
Dimension 500km 750km1000km+++
Box-Shippment1day2 day 3 day5 day
By Truck3 day 4 day 5 day
7 day
  • Easy to buy & return
  • 100% Secure Payments
  • 24x7 Support Available
  • Shop with our Application

Tags: JF3, solar roof screw, self tapping, self drilling

Taksit Tutarı
Toplam Tutar
3 x 17,36 TL
52,07 TL
6 x 8,93 TL
53,56 TL
9 x 6,13 TL
55,15 TL
12 x 4,74 TL
56,82 TL
Taksit Tutarı
Toplam Tutar
3 x 17,36 TL
52,07 TL
6 x 8,93 TL
53,56 TL
9 x 6,13 TL
55,15 TL
12 x 4,74 TL
56,82 TL
Taksit Tutarı
Toplam Tutar
3 x 17,36 TL
52,07 TL
6 x 8,93 TL
53,56 TL
9 x 6,13 TL
55,15 TL
12 x 4,74 TL
56,82 TL
Taksit Tutarı
Toplam Tutar
3 x 17,36 TL
52,07 TL
6 x 8,93 TL
53,56 TL
9 x 6,13 TL
55,15 TL
12 x 4,74 TL
56,82 TL
Taksit Tutarı
Toplam Tutar
3 x 17,36 TL
52,07 TL
6 x 8,93 TL
53,56 TL
9 x 6,13 TL
55,15 TL
12 x 4,74 TL
56,82 TL
Taksit Tutarı
Toplam Tutar
3 x 17,36 TL
52,07 TL
6 x 8,93 TL
53,56 TL
9 x 6,13 TL
55,15 TL
12 x 4,74 TL
56,82 TL
Taksit Tutarı
Toplam Tutar
3 x 17,36 TL
52,07 TL
6 x 8,93 TL
53,56 TL
9 x 6,13 TL
55,15 TL
12 x 4,74 TL
56,82 TL
Taksit Tutarı
Toplam Tutar
3 x 17,36 TL
52,07 TL
6 x 8,93 TL
53,56 TL
9 x 6,13 TL
55,15 TL
12 x 4,74 TL
56,82 TL
Taksit Tutarı
Toplam Tutar
3 x 17,36 TL
52,07 TL
6 x 8,93 TL
53,56 TL
9 x 6,13 TL
55,15 TL
12 x 4,74 TL
56,82 TL
What is the Difference Between a Self-Drilling Screw and a Self-Tapping Screw
Self-tapping screws are one of the most commonly used industrial fasteners. As on of the earliest engineered fastener products, self-tapping screws were manufactured out of hardened steel, and their use powered the Industrial Revolution. Still incredibly common today, self-tapping screws now include many styles and types made for specific fastening functions.
Terminology used in the commercial fastener trade, unlike that used in aerospace or military fasteners, can be imprecise and often cause confusion. A prime example of this impreciseness is the distinction between self-tapping screws and self-drilling screws.
A self-tapping screw can accurately be described simply a tapping screw, but is also regularly referred to as a sheet metal screw, since they are used so heavily in the sheet metal trade. Whichever name is used, a self-tapping screw (or sheet metal screw), is designated as such because it contains form mating threads (thereby “tapping” the threads) in a pre-drilled hole into which they are driven.
A self-drilling screw is a type of self-tapping screw that also features a drill point. The sharp drill point will both drill a hole and form the mating threads in a single operation.
So where does the confusion between terms come in? In many cases, the person specifying a this type of screw will interchange the terms self-tapping screw (or “Self-Tapper”) with self-drilling screw, but a screw is only a self-drilling screw when it will drill its own hole.
Other similar fasteners that could be considered to be self-tapping screws are:
Thread-Cutting Screws (TCS) - Screws that can be used to cut threads in a pre-drilled hole are known as thread-cutting screws. Thread-cutting screws are classified into different types depending on the thread-form to accomplish the thread cutting.
Thread Rolling Screws (TRS) - Screws that will roll or extrude threads in a pre-drilled hole in the substrate without removing any material are known as thread rolling screws. These screws create a very tight fit with zero clearance.
To recap, the terms self-tapping and self-drilling are not interchangeable. All self-drilling screws are self-tapping screws, but not all self-tapping screws are self-drilling screws. Both of these screws come in numerous configurations, and are widely used in the commercial, industrial and construction markets.

The solar industry is booming
The industry association "SolarPower Europe" reviewed the year 2019 and speaks of the strongest growth in the solar industry since 2010 with an additional 30 Megawatts.  Ata offers a large number of high-quality fastening solutions for the correct and secure fastening of solar installations. The product portfolio includes approved fasteners for the assembly of photovoltaic installations on the roof as well as for the assembly of the installations on open spaces.

Solar and photovoltaic systems on the roof
Secure fastening of various systems The following Ata products are suitable for secure installation using suitable mounting systems for photovoltaic modules that consist of a large number of metal components, depending on the material of the profiles and the overall system construction. ​​​​​​​
-​​​​​​​Fastening of components and retaining elements on thin-walled metal profiles: 
-Self-drilling screws of the Ata® series (JF3) Steel/steel and aluminium/steel connections:
-Stainless steel bimetal self-drillling screws with hardened steel drill point (JT3, JT6)
-Aluminium/aluminium connections: Ata stainless steel self-drilling screws (JT4, JT9)

Atakale ®
The self-drilling screw without the classic cutting bit Fast. No swarf. Reliable.​​​​​​​ The unique tip geometry without cutting bit, the high assembly speed as well as the load capacity of the Atakale ® screws are of great advantage when fastening solar installations and increase the safety of the fastening.​​​​​

Atakale ® Plus self-drilling screws
Optimised and particularly slim tip geometry The optimised and unique tip geometry of the new Atakale® Plus self-drilling screws enables a much safer application to the surface due to the optimised and slim tip. Displacement or slipping is almost impossible. At the same time, the load-carrying capacity values have been improved once again.
​​​​​​​The slim, single-fluted drill point does not produce any sharp-edged swarf that get stuck in the material and have to be removed at great expense.

Atakale® self-drilling screws
Unique screw point geometry without classic cutting edge Due to the unique screw point geometry and the special thread form, the Atakale ® screw not only fastens with reduced swarf and at high speed, it also features excellent clamping properties. ​​​​​​​Thanks to the extremely thin point, the Atakale ® screw can be precisely positioned on the surface. Displacement or slipping is almost impossible. The risk of scratching the surface coating is significantly reduced.

Your advantages at a glance ​​​​​
- Fastening with reduced swarf no manual removal of metal chips necessary
- High installation security Thanks to proven free spin zone (for side lap screws)
- ​​​​​​​​​​​​​​High installation speed Thanks to special thread form
-High load-carrying capacity For more safety
- Skid-free application ​​​​​​​Thanks to unique screw point geometry, thus no damage to the surface​​​​​​​

PVC Isolation Specification
Applications
For sealing construction joints (including moving joints) between Prefabricated concrete Outer frames and masonry Skylights Perimeter seals for fenestration in the following areas Trapezoidal profiled sheets, sandwich and metal panels Prefabricated concrete, and other material, elements (including civil engineering) industrialised building methods
Solid, timber and dry wall construction Window installation Note  Movement of structural elements and temporary changes in length have to be taken into account for the max. joint width.
Benefits
Complies with the DIN 18542 BG 1 and DIN 18055 Reliability through a wider joint application range Seals against wind, dust and driving rain Vapour diffusion permeable
Good adhesive properties, to aid installation Permanently elastic with long term life expectancy Thermal and acoustic insulation Can be painted over with standard emulsion paints Applications in all construction areas and building types are possible CE-certified (ETA-07/0072 Constant quality control to DIN standards, with regular controls from independent institutions Externally monitored by ift Rosenheim: for driving rain and air permeability (a-value) 10 year performance guarantee (On the conditions of the manufacturer (available upon request). Description ISO-BLOCO 600 is a special impregnated PUR sealing tape. It is specially designed for joints in buildings up to 100 m high, in accordance with DIN 18055. ISO-BLOCO 600 fulfils the stringent requirements of the DIN 18542 edition 2009. In addition to providing protection against driving rain to a minimum of 600 Pa (equivalent to wind force 11 - Violent Storm) the vapour permeable joint sealing tape also possesses outstanding thermal and acoustic characteristics, as well as allowing for diurnal movement.

Maximum load point
The performance of the EJObar in the context of weight is dependent upon the construction of the roof and the compression performance of the insulation, as well as the  position of the EJObar in relationship to the valley or crowns of any steel or Aluminum decking. Where it is fully supported and a uniformly distributed load is created, maximum load should be of  30 kg per/m. However, the roof construction must be checked by a structural engineer to ensure that these loadings can be accommodated.
Atakalae  JF3-2-5.5 x 25 S16 Stainless steel Bi-Met fasteners also proved to be a clean efficient method of installing brackets and sections to the Atakale  2mm aluminium box section.
The fastener’s thread geometry displaces metal in contrast to a cutting drill action. Use of this fastener means that a secure installation with a pullout performance of over 3.6KN can easily be achieved. JF3 is available as either an 8mm A/F hexagon head or with a coloured Colorfast integral Nylon head. It is manufactured from A2 (1.4301) austenitic stainless steel with a hardened carbon steel pierce point. Atakale is also available as a JF6 variant, manufactured from A4 (316) Austenitic Stainless Steel if required for specific
applications
Atakale ® Solar Fastening Systems JA3 & JZ3 –
For fastening of mounting systems for photovoltaic and thermal solar installations on exposed fastener metal panel roof Solution for rooftop PV and solar thermal installation     on commercial, industrial and agricultural buildings,       as well as on certain residential buildings with                corrugated and trapezoidal metal roofsq   Simple and secure  nstallation process q   Reduced installation timeq   Highly engineered thread-form that fastens in metal      and wood substructuresq   Precise defined depth (control) stop that allows a      project-related initial sizing incl. fastener positioning scheme q   Design that includes a proven sealing system for      corrugated and trapezoidal metal roofsq   Minimum risk of material damage problemsq   Secure and repeatable installation resultsq   Applicability to all common mounting systems and  strut railsq   High product quality through strict quality controlsq   Very secure anchoring through fastening directly into  the substructureq   Technically approved fastening systemq   Perfect adjustment to your projectqThe Atakale Solar Fastening Systemis NOT a hanger bolt!
EJOT® Solar Fastening Systems – All advantages at a glanceq   Labor saving installationqThe installation is very secure through the transfer of tensile loads and pressure forces directly into the substructureqA solar installation can easily be mounted on an existing roof – the old screws can be replaced with EJOT Solar Fastening Systems JA3 & JZ3, using the existing holesq   Minimum risk of leakage problemsqThe installer cannot change the predefined fastener setup which avoids the alteration/elimination of important quality and performance characteristicsq   Competent consulting servicesq   Application engineering and technical supportq   Flexibility regarding special requestsqShort lead-time from North American inventory shipped on a Just-In-Time (JIT) basi
Note:If an already existing roof is concerned, which is fastened onto steel substructures with Ø ¼’’ or smaller (5.5 or 6.3 mm), it is possible to remove the old screws and replace them with Ø 8 mm Atakale Solar Fastening Systems. The pre-drilling diameter has to be observed at all times.Due to the specifi c characteristics of standing seam roofs these fastening systems are not suited for such applications

SFS I3 PV Sandwich Panel SelfTapping  Crews
Features

Benefits
Self-Tapping screw Side lap stitching
Pre-assembled sealing washer
Aluminium sheets ,sandwich panels
Asymmetrical screw thread

A2 stainless steel with hardened


Innovative screw point geometry
Stainless steel sealing washer
Loose or collated, B-Metal, stainless
Out Diameter:
Lengt
Drilling capacity
5.53 
30mm
0.88mm 
GTIP Custom Code :73181400
SFS Brand Solar roof screw For 55 years SFS has been America’s partner of choice, supplying over 26 billion fasteners to commercial construction projects. Build with confidence with SFS.
 Self drilling fastener suitable for fastening of overlaps and flashings
• Fast and chip-free installation thanks to the FastTip
• No scratches on painted metal surfaces thanks to the sharp FastTip
• Cost saving installation due to post-cleaning of chips no longer necessary
• High quality EPDM sealing washer for long-term weather sealing
• High tension and shear resitance achieved by optimized fastener geometry

BI-METAL BACKGROUND Solar Self Tapping Screw
In the construction and manufacturing fastening industries two things has always been very important:Sustainability – how long will my fastener last in a given environment?Efficiency – how quickly can I fasten it?Next generation of self-drilling screws
AISI 300 Series based bi-metal self-drilling and self-tapping screws:The solution to manufacture the most ideal self-drilling and self-tapping screw, is to:Combining the main part of a screw made out of AISI 300 series Stainless Steel. Having a drill-point and the first tapping threads in hardened Carbon Steel.
The hardened Carbon Steel part (drill point and first threads) will do the drilling and tapping which is then followed by the stainless steel part going into the application and forms the permanent fixing.
This solution brings together all the best from 2 worlds, where the main screw act and works exactly as the original  manufactured self-tapping screws – just with the extra feature where the installers saves a lot of time with self-drilling and self-tapping such screws doing all processes in one go.Now it is possible to make construction solutions using suitable real stainless steel for all outdoor use in tough environments; coastal and industrial area, etc.
Self-drilling and self-tapping screws is of course needed in our modern world where “time is money” and where fast installation speed is expected in all cases. Now it is just possible to realize fast installation without sacrificing anything – the ideal combination of fast installation speed getting a self-drilling and self-tapping screw with the best corrosion performance in non-brittle and ductile qualities.

Applications
Side lap stitching of profiled steel / aluminium sheets and sandwich panels Suitable for installation with the EJOFAST® JF screwdriver. PV Solar Module 
- Fastening of profiled sheets and sandwich panels
- Side lap stitching
- Fastening smoke deflectors, edge parts and cladding
- Fixing standing seam systems
- Attaching support profiles for solar modules
- Fastening common cladding panels
- Fixing small metal shingles
- Fixing air ducts
Fastening of overlaps of profile sheets
Fastening of overlaps of sandwich panels
Fastening of flashings onto sandwich panels
Fastening of flashings onto profile sheets
Fastening of photovoltaic panel installation

Properties
A2 stainless steel with hardened steel drill point
Stainless steel sealing washer
Pre-assembled sealing washer
With free spin zone under screw head for side lap stitching
Non-skid application
Fastening with reduced swarf
Loose or collated

Technical specifications
Diameter: 4.8 mm
Drilling capacity tI + tII: 0.88 + 0.88 mm
Drive: Hexagon A/F8
Installation rotation speed: max. 1800 rpm

Specifications
ø                                            4.8
Ø Sealing Washer mm   14
Length                                19.0
Fastener material  Stainless Steel
Clamp thickness 0.0 -      4.0

Mechanical connection of components rethought Fastening technology includes numerous products that enable a strong connection of components. The areas of application are just as diverse as the available fastening solutions. There is a suitable product for every requirement and the focus is always on the reliability of the connection. The screw connection as a mechanical fastening solution is still the classic method for connecting components to one another. Screws create a secure connection between two components using different modes of operation. 

Two types of screws
A distinction is made between self-tapping and self-drilling screws: Self-tapping screws are sealing screws without drilling point. A pre-drilled hole is required here into which the screw is inserted. A hole thus has to be drilled into the components with a metal drill in a separate work step. Self-drilling screws feature a drill point with a cutting edge, so there is no need to pre-drill here. In just one work step, a hole is drilled, the female thread is formed and the components are fastened. Thus, the effort can be reduced and the assembly time can be improved, since only one tool is required for fastening

Clean installation
Sharp-edged swarf belong to the past Usually, swarf is produced during the creation of the drill hole no matter if a self-drilling screw with classic cutting edge or a self-tapping screw is installed. This swarf must be removed in a separate work step in order to prevent rusting. With the new generation of self-drilling screws, this problem is a thing of the past. The slim, single-fluted drill tip of the EJOFAST® self-drilling screws produces no sharp-edged swarf that gets stuck in the material. This makes assembly much more efficient, as cleaning work to remove swarf is no longer necessary. 

Corrosion of drilling swarf
If drilling swarf is not removed from the roof surface, it will begin to corrode and this can lead to complaints.

EJOFAST® self-drilling screws
Unique screw point geometry without classic cutting edge  Due to the unique screw point geometry and the special thread form, the EJOFAST® screw not onlyfastens with reduced swarf and at high speed, it also
features excellent clamping properties. Thanks to the extremely thin point, the EJOFAST® screw can be precisely positioned on the surface. Displacement or slipping is almost impossible. The risk of scratching the surface coating is significantly reduced

Fastening solutions for the building industry
The Atakale Construction Division caters to selected segments of the building industry. This includes professional applications  on building facades as well as installation solutions for technical facilities inside the
building. The aspiration to high product quality is not an end in itself for . The customer really benefi ts from our screws and anchors. Therefore reliable installation also means low failure costs for the
customer. Moreover, durable quality joints provide the best protection against expensive customer complaints. This is why our strategic product lines are manufactured according to highest quality standards.
We convey expert knowledge about the use of our products to all our customers. And if required, we are on hand with advice and support for fastening systems
Other services include advice over the telephone, application advice on-site, initial sizing, component tests in the Atakale Solar Screw Test Centre and a comprehensive training programme for system providers, architects,
specifi ers, distributors and installers with the TEC ACADEMY. Innovative products are the key to success. We leave nothing to chance. We identify our customers' needs under real conditions on the job
site. Communication from the market and about market requirements to the development departments is ensured by a regular exchange between our technical experts and specialists and users from the
international building industry. This is how we develop innovative product solutions that offer a clear added value and inspire customers

Discover Atakale Worldwide
Atakale is an European market leader in fastening technology. In Europe, our numerous sales companies and offi ces guarantee direct customer contact and fast availability of our products. Atakale services and
products are also available on the worldwide stage. We have production sites and sales offi ces in North America and Asia Find your contact person for all Atakale distribution and production companies and our partner and sales offi ces – worldwide. We look forward to hearing from you.
The Atakale ® self-drilling screw JF3-2-5.5 enables both the fastening of mounting rails, trapezoidal sheet metal clamp/bridges and smoke deflectors to the roof, as well as the fastening of various assembly components for outdoor systems. Due to the material displacement, it has a particularly high load-carrying capacity. In addition, thanks to its approvals, it can also be used on the international market.

Atakale J3 Bi-Metal Self-Drilling Screws
Atakale ® - the innovative solar panel roof mounting hardware for your photovoltaic installation.... fast, reliable and without creating debris! The Atakale ® thin sheet metal screw is part of the latest screw generation at Atakale . It is a self-drilling screw without the usual cutting bit.  And yes, it works!
The best solar mounting hardware for fixing metal profiles or PV mounting systems' plastic clips to profiled metal sheets or insulated metal panels. Fastens sheet metal fast: used extensively for side-lap stitching on exposed fastener metal panel roofs. Used by leading solar mounting system manufacturers to fasten wind deflectors of lightweight flat roof racking systems and fasten special PV mounting systems directly to steel roof profiles.
Excellent clamping characteristics
Self-drilling screw without the common drill tip
Twin thread for faster installation
Asymmetric thread for high-pull-out values
New screw point geometry prevents the fastener from slipping
Point geometry ensures almost no metal chips
Material SS 304 (A2) with case-hardened drill point
Preassembled 304 SS washer with vulcanized elastomer for excellent atmospheric/UV resistance and optimal load transmission and secure sealing.
Screw Features
Screw Type Self Tagging
Screw DIN Kodu 10666
Screw Head Geometry Hexagonal
Screw Diameter-mm 5.5
Screw Drilling Capacity mm 1
Screw Sealing Washer Yes
Screw Application Solar
Screw Size 5.5x25
Screw Stiffness Stanless hardened steel +Bimetal
Screw Coating Zinc
Screw Certificate
Screw Certificate ISO, CE

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha
Whatsapp Whatsapp Whatsapp Whatsapp