- High installation security Thanks to proven free spin zone (for side lap screws)
- Skid-free application Thanks to unique screw point geometry, thus no damage to the surface
PVC Isolation Specification
For sealing construction joints (including moving joints) between Prefabricated concrete Outer frames and masonry Skylights Perimeter seals for fenestration in the following areas Trapezoidal profiled sheets, sandwich and metal panels Prefabricated concrete, and other material, elements (including civil engineering) industrialised building methods
Solid, timber and dry wall construction Window installation Note Movement of structural elements and temporary changes in length have to be taken into account for the max. joint width.
Complies with the DIN 18542 BG 1 and DIN 18055 Reliability through a wider joint application range Seals against wind, dust and driving rain Vapour diffusion permeable
Good adhesive properties, to aid installation Permanently elastic with long term life expectancy Thermal and acoustic insulation Can be painted over with standard emulsion paints Applications in all construction areas and building types are possible CE-certified (ETA-07/0072 Constant quality control to DIN standards, with regular controls from independent institutions Externally monitored by ift Rosenheim: for driving rain and air permeability (a-value) 10 year performance guarantee (On the conditions of the manufacturer (available upon request). Description ISO-BLOCO 600 is a special impregnated PUR sealing tape. It is specially designed for joints in buildings up to 100 m high, in accordance with DIN 18055. ISO-BLOCO 600 fulfils the stringent requirements of the DIN 18542 edition 2009. In addition to providing protection against driving rain to a minimum of 600 Pa (equivalent to wind force 11 - Violent Storm) the vapour permeable joint sealing tape also possesses outstanding thermal and acoustic characteristics, as well as allowing for diurnal movement.
Maximum load point
The performance of the EJObar in the context of weight is dependent upon the construction of the roof and the compression performance of the insulation, as well as the position of the EJObar in relationship to the valley or crowns of any steel or Aluminum decking. Where it is fully supported and a uniformly distributed load is created, maximum load should be of 30 kg per/m. However, the roof construction must be checked by a structural engineer to ensure that these loadings can be accommodated.
Atakalae JF3-2-5.5 x 25 S16 Stainless steel Bi-Met fasteners also proved to be a clean efficient method of installing brackets and sections to the Atakale 2mm aluminium box section.
The fastener’s thread geometry displaces metal in contrast to a cutting drill action. Use of this fastener means that a secure installation with a pullout performance of over 3.6KN can easily be achieved. JF3 is available as either an 8mm A/F hexagon head or with a coloured Colorfast integral Nylon head. It is manufactured from A2 (1.4301) austenitic stainless steel with a hardened carbon steel pierce point. Atakale is also available as a JF6 variant, manufactured from A4 (316) Austenitic Stainless Steel if required for specific
Atakale ® Solar Fastening Systems JA3 & JZ3 –
For fastening of mounting systems for photovoltaic and thermal solar installations on exposed fastener metal panel roof Solution for rooftop PV and solar thermal installation on commercial, industrial and agricultural buildings, as well as on certain residential buildings with corrugated and trapezoidal metal roofsq Simple and secure nstallation process q Reduced installation timeq Highly engineered thread-form that fastens in metal and wood substructuresq Precise defined depth (control) stop that allows a project-related initial sizing incl. fastener positioning scheme q Design that includes a proven sealing system for corrugated and trapezoidal metal roofsq Minimum risk of material damage problemsq Secure and repeatable installation resultsq Applicability to all common mounting systems and strut railsq High product quality through strict quality controlsq Very secure anchoring through fastening directly into the substructureq Technically approved fastening systemq Perfect adjustment to your projectqThe Atakale Solar Fastening Systemis NOT a hanger bolt!
EJOT® Solar Fastening Systems – All advantages at a glanceq Labor saving installationqThe installation is very secure through the transfer of tensile loads and pressure forces directly into the substructureqA solar installation can easily be mounted on an existing roof – the old screws can be replaced with EJOT Solar Fastening Systems JA3 & JZ3, using the existing holesq Minimum risk of leakage problemsqThe installer cannot change the predefined fastener setup which avoids the alteration/elimination of important quality and performance characteristicsq Competent consulting servicesq Application engineering and technical supportq Flexibility regarding special requestsqShort lead-time from North American inventory shipped on a Just-In-Time (JIT) basi
Note:If an already existing roof is concerned, which is fastened onto steel substructures with Ø ¼’’ or smaller (5.5 or 6.3 mm), it is possible to remove the old screws and replace them with Ø 8 mm Atakale Solar Fastening Systems. The pre-drilling diameter has to be observed at all times.Due to the specifi c characteristics of standing seam roofs these fastening systems are not suited for such applications