| Brand: | BYD |
| Product Code: | BYD LVS 20KWH |
| Reward Points: | 8000 |
| SKU : | BYD LVS 20KWh 48V |
| Dimension | 500km | 750km | 1000km | +++ |
|---|---|---|---|---|
| Box-Shippment | 1day | 2 day | 3 day | 5 day |
| By Truck | 3 day | 4 day | 5 day | 7 day |
Tags: BYD LVS, BYD 20kwh, 48V BYD Premium, Residental Storage, 51.2V BYD High Voltage Battery
If LiFePO4 batteries are not fully discharged, they do not need to be charged after each use. LiFePO4 batteries do not get damaged when left in a partial state of charge (PSOC). You can charge your LiFePO4 batteries after each use or when they have been discharged up to 80% DOD (20% SOC). If the Battery Management System BMS) disconnects the battery due to low voltage (voltage will be <10V), remove the load and charge immediately using a LiFePO4 battery charger.
LiFePO4 batteries can be safely charged between 0°C to 45°C (32°F to 113°F). LiFePO4 batteries do not require temperature compensation for voltage when charging at hot or cold temperatures. All Canbat LiFePO4 batteries come with an internal BMS that protects the battery from low and high temperatures. If the BMS disconnects due to low temperature, the battery must warm up for the BMS to reconnect and accept the charging current. If the BMS disconnects because of high temperature, the battery will need to cool down before the BMS will accept charging the battery. Please refer to your specific battery’s datasheet for the BMS low temperature and high-temperature cut-off and reconnect values.
The charging and discharging temperature for lithium batteries from our LT series is -20°C to 60°C. Canbat Low Temperature (LT) Lithium Batteries are cold-weather rated, designed for Canada’s cold climates. These batteries have a built-in heating system featuring proprietary technology that draws power from the charger. No additional components are required. The entire process of heating and charging is completely seamless. The heating system automatically activates once charging below 0°C is attempted, and it automatically deactivates when it’s no longer needed. The heating system does not take power from the battery, but rather from the charger, ensuring the lithium battery is not discharging itself and keeping you powered. Simply plug the LT lithium battery into the LiFePO4 charger and the internal heating and monitoring systems take care of the rest.
Most lead-acid battery chargers can be used with LiFePO4 batteries as long as they are within the appropriate voltage guidelines. AGM and Gel algorithms typically fall within the LiFePO4 voltage requirements. The voltage for flooded battery charging algorithms is often higher than LiFePO4 charging requirements, which will result in the BMS disconnecting. If this happens, it is generally good practice to replace your charger for one with a LiFePO4 charge profile. Since the BMS protects the battery, using lead-acid chargers will typically not damage the battery.
Note that if the BMS disconnects due to low voltage, a lead-acid battery charger may not be able to reconnect the BMS, even if the charger has the acceptable charging parameters to charge LiFePO4. This is because when the BMS disconnects, the lithium battery will not have a voltage as it will read 0V on a voltmeter, while lead-acid chargers require the battery to read out a voltage to start charging. If the battery is reading 0V, the lead-acid battery charger will not be able to understand that a battery is connected and that it should start charging. This is also true for some low-quality lithium chargers. It is always recommended that you invest in a high-quality LiFePO4 charger to ensure high performance and longevity. Feel free to contact Canbat should you have any questions.
When connecting LiFePO4 batteries in parallel, please make sure each battery is within 0.1V of each other before putting them in service, This will minimize the chance of imbalance between batteries. If you’re charging 12V LiFePO4 batteries, the charging voltage should be between 14V – 14.2V. When charging 24V batteries in parallel, the charging voltage should be 28V – 28.4V. Charging 36V lithium batteries in parallel requires a voltage of 42V – 42.6V. Finally, charging 48V LiFePO4 batteries require voltage parameters of 56V – 56.8V. Below is a table with a summary showing the voltage requirements for each system voltage.
| System Voltage | Charging parameters |
| 12V | 14V – 14.2V |
| 24V | 28V – 28.4V |
| 36V | 42V – 42.6V |
| 48V | 56V – 56.8V |
The voltage parameters apply to both charging profiles CC and CC-CV. If your charger’s voltage is lower than those listed in the table, it will not damage your battery, but it will be undercharged, and it will not provide the full rated capacity of the battery. If your charger’s voltages are higher than those listed in the tables above, the BMS may disconnect the battery and you may have to remove the load to reconnect. We recommend you replace the charger to avoid this inconvenience and to invest in a high-quality LiFePO4 battery charger.
When connecting batteries in series, please make sure each battery is within 50mV (0.05V) of each other before putting them in service. This will minimize the chance of an imbalance between batteries. If your batteries get out of balance, the voltage of any battery is >50mV (0.05V) from another battery in the set, you should charge each battery individually to rebalance. You can charge each battery individually periodically to avoid imbalance. When charging LiFePO4 batteries in series, it is best to use a multi-bank charger that charges each battery individually to ensure the cells remain balanced. You can also use a 24V battery LiFePO4 charger or a 48V battery LiFePO4 charger if you’d like to charge your system as a whole.
Below are the key, typical charger inputs when using an inverter/charger or charge controller for charging LiFePO4 batteries. Many inverter/ chargers require additional parameters, please contact Canbat technical support for assistance. LiFePO4 batteries do not require equalizing. LiFePO4 batteries do not require temperature compensation for voltage when charging at hot or cold temperatures.
| PARAMETER | 12V SYSTEM | 24V SYSTEM | 36V SYSTEM | 48V SYSTEM |
| Bulk Voltage | 14V – 14.6V | 28V – 29.2V | 42V – 43.8V | 56V – 58.4V |
| Absorption Voltage | 14V – 14.6V | 28V – 29.2V | 42V – 43.8V | 56V – 58.4V |
| Absorption Time | 0- 6 min | 0- 6 min | 0- 6 min | 0- 6 min |
| Float Voltage | 13.8V ± 0.2V | 27.6V ± 0.2V | 41.4V ± 0.2V | 55.2V ± 0.2V |
| Low Voltage Cutoff | 11V | 22V | 33V | 44V |
| High Voltage Cutoff | 14.6 | 29.2V | 43.8V | 58.4V |
Depending on the quality of the alternator, it may work fine to charge LiFePO4 batteries without modifications. However, low-quality alternators with poor voltage regulation can cause the BMS to disconnect LiFePO4 batteries. If the BMS disconnects the batteries the alternator may be damaged. To protect your LiFePO4 battery and alternator, please be sure to use a compatible high-quality alternator or install a voltage regulator. You can also use a DC to DC charger to safely and effectively charge your batteries including house banks. Installing a DC to DC charger is the recommended option when it comes to charging lithium with an alternator.
If you are using a voltage-based fuel gauge that is designed for lead-acid batteries, it will not accurately measure the state of charge (SOC) of LiFePO4 batteries. Please replace your fuel gauge with one that measures current rather than voltage to accurately measure the state of charge of lithium iron phosphate batteries.
If you have any technical questions, please contact Canbat Technical Support at +1 778-358-3925.
Yes, you can charge Canbat lithium batteries with solar panels. In fact, you can charge them with any type of charging equipment, as long as the charging voltage is within 14V to 14.6V for our 12V LiFePO4 batteries.
Yes, but it is recommended to invest in a DC to DC charger to protect your LiFePO4 battery and alternator.
Most lead-acid battery chargers can be used with LiFePO4 batteries as long as they are within the appropriate voltage guidelines. AGM and Gel algorithms typically fall within the LiFePO4 voltage requirements. The voltage for wet cell or flooded battery charging algorithms are often higher than LiFePO4 requirements, which will result in the BMS disconnecting the battery at the end of the charge cycle, and may result in the charger displaying an error code. If this happens, it is generally good practice to replace your charger. Since the BMS protects the battery, using lead-acid chargers will not damage the battery.
LiFePO4 batteries can safely charge between 0°C to 45°C (32°F to 113°F). If your application requires you to recharge in freezing temperatures, Canbat Low Temperature series (LT) can be recharged between -20°C to 45°C (-4°F to 113°F). The LT series has a built-in heating system featuring proprietary technology that draws power from the charger itself. No additional components are required. The entire process of heating and charging is completely seamless. The heating system automatically activates once charging below 0°C is attempted, and it automatically deactivates when it’s no longer needed. The heating system does not take power from the battery, but rather from the charger, ensuring the battery is not discharging itself. Simply plug the battery into the lithium charger and the internal heating and monitoring systems take care of the rest.
The short answer is no. In order to fully charge a 12V LiFePO4 battery, a charger with a voltage of 14V to 14.6V is required. Most AGM battery chargers are within that range and they would be compatible with Canbat lithium batteries. If you have a charger with a lower voltage, it may still charge the battery, but it won’t charge it to 100%. A charger with a higher voltage would not charge the battery and the BMS would enter protection mode due to its high voltage disconnect feature. Although many AGM battery chargers are compatible with LiFePO4, wet cell or flooded battery chargers are not compatible as they typically charge at a higher voltage.
Canbat LiFePO4 batteries can be discharged up to 100% of their capacity. However, to optimize the performance of your LiFePO4 battery, to achieve a higher cycle life, and to avoid the BMS disconnecting the battery, we recommend limiting the discharge to 80%. If the BMS disconnects the battery due to low voltage, at 100% depth of discharge, remove the load and recharge using a LiFePO4 charger to reactivate the BMS.
LiFePO4 batteries can safely discharge between -4°F to 140°F (-20°C to 60°C). All Canbat LiFePO4 batteries come with a built-in BMS that protects the battery from low-temperatures and high-temperatures. If the BMS disconnects due to cold or high temperature, wait until the temperature is more suitable and the BMS will reconnect automatically.
It is recommended to store LiFePO4 batteries at about 50% state of charge (SOC). If the batteries are stored for long periods of time, cycle the batteries at least every 6 months. Do not store batteries that are discharged. They do not require a trickle charger. · Recommended storage temperature: -5 to +35°C (23 to 95 °F) · Storage up to 1 month: -20 to +60°C (4 to 140 °F) · Storage up to 3 months: -10 to +35°C (14 to 95 °F) · Extended storage time: +15 to +35°C (59 to 95 °F) It is highly recommended to store lithium batteries indoors during the offseason.
Yes, you can connect up to four 12V batteries of the same model in series to obtain a higher voltage. Do not connect lithium batteries in both parallel and series simultaneously. Please note that the 24V lithium batteries are designed for 24V applications and do not support series connections. Likewise with the 36V and 48V lithium batteries. When charging LiFePO4 batteries in series, it’s recommended to use a multi-bank battery charger that can charge each battery individually. If that’s not an option, you can also use a 24V battery LiFePO4 charger or a 48V battery LiFePO4 charger if you’d like to charge your system as a whole. Canbat lithium batteries support charging in series.
Yes, you can connect up to four 12V batteries of the same model in parallel to obtain a higher capacity. Do not connect lithium batteries in both parallel and series simultaneously. Canbat 24V and 36V lithium batteries also support up to 4 units in parallel. Canbat 48V LiFePO4 batteries support up to 14 units in parallel as they are designed for larger projects. Canbat lithium batteries support charging in parallel.
Yes, Canbat LiFePO4 batteries can be installed upright or on their sides. Please fasten the battery if installed in a moving vehicle, such as in an RV or a boat. Please also avoid placing anything over the battery, and it’s recommended to cover the terminals with a plastic cap to prevent an external short circuit.
Yes, LiFePO4 is a safe chemistry and the most stable lithium-type battery on the market. Canbat lithium is UL 1642 certified, which means they have been tested for short-circuit, abnormal charging, crush, impact, shock, vibration, heating, temperature cycling and pressure. All Canbat LiFePO4 batteries come with an internal Battery Management System. The BMS protects against
If you already have a lead-acid or a LiFePO4 charger and you want to make sure it’s compatible, chat with one of our battery experts. We can check your charger’s user manual and confirm the voltage parameters. Canbat offers Canada-based 24/7 chat support to all its clients.
BYD Co. Ltd., one of the world’s largest manufacturers of rechargeable batteries, is delighted to receive the recognition as “Top Brand PV Storage Europe 2023” along with “Top Brand PV Storage 2023” country seals for Germany, Austria, Switzerland, Italy, Spain, Portugal, Denmark and Sweden (further countries still in evaluation). The award highlights the best-in-class companies out of the eyes of installers on country and regional level. BYD is the first storage solution provider this year to receive the industry seal of approval for the European region after having been recognised as “Top Brand” for more and more countries. To qualify for the “Europe” seal, the storage provider had to be ranked with a top market distribution within the sample group, high recommendation and brand awareness results in at least 8 European countries. In 2022, BYD was the only storage brand to receive this European Seal.
• Scalable from 4 kWh to 256 kWh • Maximum Flexibility for any Application with up to 64 Modules Connected in Parallel
• Compatible with Market Leading 1 and 3 Phase Inverters • Cobalt Free Lithium Iron Phosphate (LFP) Battery: Maximum Safety, Life Cycle and Power
• Capable of High-Powered Emergency-Backup and Off-Grid Function • Patented Internal Plug Design Requires No Additional Wiring
• Self-Consumption Optimization for Residential and
Commercial Applications
4 kWh Module
• Modular Design Simplifies Transport and Installation The BYD Battery-Box Premium LVS is a lithium iron phosphate (LFP) battery pack for use with an external inverter. A single Battery-Box Premium LVS contains between 1 to 6 battery modules LVS stacked in parallel and can reach 4 to 24.0 kWh usable capacity in one tower:
• Battery-Box LVS 4.0 (4 kWh)
• Battery-Box LVS 8.0 (8 kWh)
• Battery-Box LVS 12.0 (12 kWh)
• Battery-Box LVS 16.0 (16 kWh)
• Battery-Box LVS 20.0 (20 kWh - single tower only)
• Battery-Box LVS 24.0 (24 kWh - single tower only)
Connect up to 16 Battery-Box LVS 16.0 in parallel for a maximum size of 256 kWh. Ability to scale by adding LVS modules or parallel towers of 1 to 4 modules later.
The battery system is for residential and works with a photovoltaic system. It is a 48V Li-ion battery storage system, with the control module on itself. It could be operated in on-grid and off-grid modes with compatible inverters. The battery system could be connected to the Internet through network cable for maintenance and firmware updating. The battery system must only be used as stationary equipment. The battery system is suitable for indoor and outdoor use under the conditions mentioned in Section
The battery system must only be operated in connection with a compatible inverter. The list (BYD Battery-Box Premium LVS Minimum Configuration List) of these inverters could be found at www.bydbatterybox.com. The battery system is not suitable for supplying life-sustaining medical devices. Please ensure that no personal injury would lead due to the power outage of the battery system. Alterations to the battery system, e.g., changes or modifications are not allowed unless the written permission of BYD is achieved. Unauthorized alterations will void the guarantee and warranty claims. BYD shall not be held liable for any damage caused by such changes. The type label should always be attached to the battery system.
Compatible Inverters
Fronius, Goodwe, Viesmann, Kostal, SMA,Sungrow, GE, KACO, Kaco NH,Ingeteam, Solis, Canadian Solar, Deye, Solplanet, Western Co, Sosen,
BYD Hightech Power 4kWh88kwh/12kwh/20kwh/24kwh Lityum Batarya LFP Lithium
Designed with the unique combination of Lithium Iron Phosphate batteries and Advanced Battery Management System (BMS), Smart LB Series LFP Lithium batteries are offered in 12.8V and 48V voltage options and in different capacities.BYD Hightech Power Cabinet Lithium Batteries, which have impressive deep discharge values, keep the efficiency of the system at the highest level by working at high capacity throughout their usage periods with excellent cycle performance.
BYD Hightech Power Cabinet LFP Lithium Batteries, which have a durable and IP55 metal case design, are presented as an ecological energy storage solution that provides functionality and flexibility in use thanks to its high current carrying capacity connection terminals.
Designed with the latest generation quality components, BYD LiFePO4 Lithium Batteries are available in a variety of capacities at three voltage options as 51ç2Volt Combining aesthetic appearance with great performance, BYD LiFePO4 Lithium Batteries offer all the capacities they have unlike conventional batteries and also have considerably higher cycle number and usage time with the contained technology.
BYD is the brand of BYD energy. manufactures solar panels in Turkey. It is also an Inverter and Battery importer.
Battery Management System
The unique combination of lithium iron phosphate batteries and BMS makes the lithium battery a robust, safe and easy-to-use energy storage solution. Advanced internal BMS technology combines functionality and ease of use, balancing the charge and discharge of cells and extending their cycle life.
High Efficiency
LiFePO4 Lithium Batteries with high D.O.D values keep the system's efficiency at its peak by operating at high capacity for long periods of time and providing outstanding cycle performance.
Durable Construction
Lithium Batteries have several advantages in use, such as low internal resistance, high efficiency, and a wide operating temperature range, when compared to conventional batteries, thanks to their
high-quality components and LiFePO4 technology.
Stylish and Compact Design
LiFePO4 batteries, which have a durable and IP65 metal case design, provide functionality and flexibility in use, thanks to special connector ends with high current carrying capacity. In addition, with its energy density per unit area, it has the advantage of size and weight compared to conventional batteries.
Long Life & High Investment Profit
Although the initial investment cost of LiFePO4 Lithium Batteries seems to be higher compared to conventional batteries, they are the most Daly BMS LCD solution that provides benefits at many points during their lifetime, thanks to their long service life and superior performance & efficiency compared to other lithium technologies.
Clear & Safe Energy
Lithium Batteries with LiFePO4 technology work more safely and stably than conventional lead-acid batteries and other lithium technologies. In addition, its environmentally friendly technology as it does not emit harmful gases
Parallel Combiner Box
Via lithium battery parallel combiner box, that can be fully compatible with LiFePO4 Lithium batteries, if more energy is required, 2 or 4 lithium batteries can be connected in parallel safely and without
losing performance.
Durable Metal Case:Aesthetic, compact and durable metal cabinet design
Eco-Friendly Technology:Safe and clean LiFePO4 technology without harmful gas emission
Expandable Capacity:Increase capacity safely and without loss with Parallel Combiner Box
IP67 Protection Class:IP67 compatible metal cabinet and connector components
Manufacturer of BYD specializes in battery design, production, marketing and services in many different industry sectors, such as Telecom Base Stations, AGV, RV, E-Forklift, E-Sweeper, Golf Carts, Golf Trolley, Gardering Machine, Boats, Cleaning Machine, Solar Energy Storage and so on. We are so familiar with all these projects because we`ve work on them for years.
Many of project purchasers and the project development engineer are meeting various problems when they work with the battery selecting and sourcing, such as short cycle life caused by cell differences, terrible heat cooling management, slow and poor developing ability of a more functional BMS, difficulties of integrating BMS and other parts by communication protocol and on. We are deeply aware of all these existing problems, along with the market growing, lithium batteries are solution engineering require much better engineer team than many other products. BYD were built to solve this problems for you, and save much of money and energy of sourcing a reliable lithium battery products.
High Efficiency
LiFePO4 batteries have a flatter discharge curve that holds above 12V for up to 90% of its usage capacity. It consumes an even amount of energy efficiently, allowing for longer use and without significant fluctuations in energy consumption. By contrast, Sealed lead acid batteries increase their consumption rate as they discharge and this consumption rate becomes even greater when SLA batteries hit 50%.
LiFePo4 battery pack applications:
solar lamp backup power supply, stroller power supply, outdoor lighting, monitoring emergency power supply, xenon lamp backup power supply, outdoor audio backup power supply, car wash power supply, electric sprayer power supply, outdoor audio backup power supply, electronic scale power supply, elevator power supply, access control power supply, UPS safety monitoring, fire engine, emergency lighting, ship, RV, backup power supply, golf cart, forklift, AGV, solar energy and other places where lead acid is used.
Comprehensive One-stop service of R&D, production, and marketing of all kinds of high-efficient new energy batteries and battery packs.
Professional Focus on high-efficient battery manufacturing over 15 years experience.
Fast Quick delivery: 7 days for samples:15-20 days for batch goods.
VDE2510-50 / IEC62619 / CEC / CE / UN38.3 certification. 100% tested and inspection before shipping to make no unqualified goods in order to reduce your risk.
Reputation Keep a long-term stable cooperation relationship with numerous well-known branded batteries' retailers and agents at home and abroad, among them are Panasonic, Maxell, Sanyo, LG, Samsung, Sony, FDK, Mitsubishi, Toshiba, etc.
LiFePo4 battery pack applications:
solar lamp backup power supply, stroller power supply, outdoor lighting, monitoring emergency power supply, xenon lamp backup power supply, outdoor audio backup power supply, car wash power supply, electric sprayer power supply, outdoor audio backup power supply, electronic scale power supply, elevator power supply, access control power supply, UPS safety monitoring, fire engine, emergency lighting, ship, RV, backup power supply, golf cart, forklift, AGV, solar energy and other places where lead acid is used.
Adhering to the concept of growth, happiness and respect, we are a down-to-earth entity and we continuously create value for our customer to achieve a win-win situation. With environmentally friendly energy sources being our focus, research and development as the driving force, quality, customer satisfaction, staff achievements, shareholders added value, partner respect and social recognition as our values and mission, we believe that we can improve the lives of all humanity by taking one step at a time.
2. Benefits fromPeak Shaving
House: Load Shifting Store the power during low-peak andusetheenergy at peak-time. Save the money which happens arising from peak rate. Transmission&Distribution: peak ShavingSave on the electricity bills by reducing peak demand
3. VPP Revenue
Enabling a cost reduction, as well as boosting the system’s efficiency
Product Warranty
Warranty conditions
1- The warranty period starts from the delivery date of the product. The warranty period of the products is 2 years (24 months).
2- Using the product as shown in the introduction and user manual and authorized service personnel Provided that it has not been interfered with for maintenance, repair or any other reason by persons other than the entire product, including all its parts; delivery of the product against material, workmanship and manufacturing defects. It is under the guarantee of our Company for the period specified above from the date of
3- If it is understood that the product is defective, the consumer is informed about the Protection of the Consumer No. 6502. in article 11 of the law;
a) Withdrawal from the contract,
b) Requesting a discount from the sales price,
c) Requesting a free repair,
d) Requesting replacement of the sold item with a non-defective one may use one of its rights.
4- In case the consumer chooses the right to free repair from these rights, the seller; labor cost, replacement
| Battery Comparison Criteria | LifePo4 Battery | Jel/AGM/Opzs Lead Acid Battery |
| Number of Cycles 80% Deep Discharge | 6000 | 600 |
| Efficiency | %96 | %85 |
| Charging time 80% Capacity | 2 Hour | 8 Hour |
| Safe Capacity Usage | %80 | %60 |
| Maintenance Requirement | No | Yes |
| Voltage Stability(%100-%10) | 14V/12.4V | 13V/11.51V |
| weight100AH 12V | 12 kg | 30 kg |
| Operating Temperature (without capacity loss) | -20ºC~ 60℃ | 20ºC ~ 25℃ |
| Impact vibration resistance | Çok iyi | iyi |
| Shelf Life -Calendar Life | 15 Sene | 12 Sene |
| Standby Discharge Rate | %2 | %3 |
| Maximum withstand temperature | 90ºC | 60ºC |
| Require Special Charger | No | No |
| Cell Voltage | 3.2V | 2V |
| Output power Stability 90% discharge | Fixed | Variable |
| Instant Maximum Discharge Current 100AH | 300aH | 300AH |
| Maximum Charge Current At Empty | 100Ah | 30AH |
| 1 Hour Discharge Capacity | 90Ah | 59AH |
| Maximum Guarantee Given | 12 Sene | 2 Sene |
| Protection | BMS/Elektronik | Koruma Yok |
| How long has it been used | 1996/( 2017 populer) | 1950/(1970 populer) |
| Toxic Waste | No | Yes/Lead |
| Recycling | Mo | %100 recycling |
| Repair/Recovery | No | Possbile |
| Serial Parallel Connected | No | Yes |
| Quality Classes | A,B,C Grade | A,B Grade |
| In case of short circuit | Withouth BMS Explasion | Intense gas will be released |
| Can it be transported by plane | Yes(UN3091 UN3481) | YEs |
| Performance below 0ºC | Charge No, Decharge Yes | Charge and Descharge |
| Overcharge | Demaged | Only capacity lost |
| Breakdown | high | Seldom |
Durability | Weak | High |
| Reliability | Weak | High |
| Use of | Dificult | Easy |
| Replace new one | Dificult and high cost | Easy and Cheap |
| Scrap price | No Sale Scrapt | 1USD/kg |
| Battery Electrical Features | |
| Battery Nominal Capacity Ah | 390 |
| Battery Wh Capacity | 20000 |
| Battary Voltage Volt | 48 |
| Battery Types | LifePo4 |
| LifePo4 Battery Type | Residential |
| Battery Cycle Use %90 | 6000 |
| BMS Charge Current Amper | 250 |
| BMS Decharge Current Amper | 250 |
| LifePo4 Paralellel Serial | Yes |
| LifePo4 Communication | RS485, CAN2.0 |
| Battery Internal Resistance mΩ 25°C | 63 |
| Maximum Discharge Current Amper Pulse | 360 |
| Absorption Charge Current Amper | 250 |
| Battary Float Voltage Volt | 51.2 |
| Self Descharge 25ºC % | 2 |
| Battery Features | Lithium Iron Phosphate (cobalt-free) High-Voltage Series IP55 |
| Battery Mechanical Features | |
| Battery Dimension | 1460x650x298 mm (57.48x25.59x11.73inch) |
| Battery Weight kg | 244 |
| Battery Terminal Type | DC Port |
| Battery Certificates | |
| Battery Design Life Years | 10 |
| Battery Made In | China |
| Battery Certificates | VDE2510-50 / IEC62619 / CEC / CE / UN38.3 |
| Battery Warranty Time | 10 |
| Battery Customer Rate %100 | 85 |
218,780.40₺ 220,398.00₺ Ex Tax: 182,317.00₺
92,607.60₺ 109,188.00₺ Ex Tax: 77,173.00₺
262,860.00₺ Ex Tax: 219,050.00₺
323,520.00₺ Ex Tax: 269,600.00₺
384,180.00₺ Ex Tax: 320,150.00₺
