Shop By Categories
Amphenol UTX Series PV Cable MC4 Connector 6 mm²  UTXCFA6AM+UTXCFA6AM Set

Amphenol UTX Series PV Cable MC4 Connector 6 mm² UTXCFA6AM+UTXCFA6AM Set

Product Code: UTXCFA6AM Set
Reward Points: 1
SKU : Amphenol UTX MC4 6
Product available in stock : 36
  • 156.00₺

  • Ex Tax: 130.00₺
  • Price in reward points: 10
  • 10 or more 125.19₺
  • 1000 or more 70.59₺

The products can be delivered from the factory, Ankara or Istanbul branch. If you are close to the branches of our company, you can check the stock in our unit close to you by contacting us by phone or e-mail.
Shippment Fee :You can order or order shipping cost. Those who cannot get cheap money from our company.
Dimension 500km 750km1000km+++
Box-Shippment1day2 day 3 day5 day
By Truck3 day 4 day 5 day
7 day
  • Easy to buy & return
  • 100% Secure Payments
  • 24x7 Support Available
  • Shop with our Application

Tags: Amphenol Mc4, UTXCFA4AM, UTXCFA4AM

Taksit Tutarı
Toplam Tutar
3 x 54,63 TL
163,88 TL
6 x 29,27 TL
175,60 TL
Taksit Tutarı
Toplam Tutar
3 x 54,63 TL
163,88 TL
6 x 29,27 TL
175,60 TL
Taksit Tutarı
Toplam Tutar
3 x 54,63 TL
163,88 TL
6 x 29,27 TL
175,60 TL
Taksit Tutarı
Toplam Tutar
3 x 54,63 TL
163,88 TL
6 x 29,27 TL
175,60 TL
Taksit Tutarı
Toplam Tutar
3 x 54,63 TL
163,88 TL
6 x 29,27 TL
175,60 TL
Taksit Tutarı
Toplam Tutar
3 x 54,63 TL
163,88 TL
6 x 29,27 TL
175,60 TL
Taksit Tutarı
Toplam Tutar
3 x 54,63 TL
163,88 TL
6 x 29,27 TL
175,60 TL
Taksit Tutarı
Toplam Tutar
3 x 54,63 TL
163,88 TL
6 x 29,27 TL
175,60 TL
Taksit Tutarı
Toplam Tutar
3 x 54,63 TL
163,88 TL
6 x 29,27 TL
175,60 TL


PV connectors are integral to every solar project: they are the links through which DC solar power is transmitted from PV modules through cables into inverters. For a system to produce AC power safely and reliably, connectors must:

1. Provide low-resistance connections that minimize resistive losses as electricity flows through the array.

2. Withstand 25+ years of environmental exposure with minimal corrosion, degradation or current leakage.

However, the industry lacks a universal standard for PV connector design. While the design details of these electromechanical devices vary, they usually have a male part, which is an internal plug that encloses a contact, and a female part, which is a socket with an extended contact. Tightly locking these two parts creates an electrical circuit. Hot connectors, or connectors that have high operating temperatures, are the most important indicator of latent failure. Any other warning signs are usually hidden from view because field-made connectors cannot be internally inspected after installation without destroying them. 

Inside a PV Connector

The inside of a PV connector is rarely seen. Many PV connectors are field-made, which means their two parts are pushed together in the field during installation. Once locked, opening a field-made connector permanently destroys it. PVEL's field testing team obtained the image shown to the right using an advanced lab testing technique called X-ray Computed Tomography, which yields a 3D image of the inside of the connector.

Connectors and Fires

Connectors are a leading cause of fires instigated by PV systems in many global solar markets. These rare events pose severe threats to safety, property and even the public image of solar power. While many are confidential, there are documented cases of PV system fires and connector failures: • In January 2022, SunPower initiated a >$30MM USD PV connector replacement initiative due to a cracking issue in third-party products it supplied.1 • In the U.K., 27% of 58 fires instigated by PV systems from 2010 to 2017 were caused by connectors.2 • In Germany, connectors were blamed for 24% of 180 fires caused by PV systems from 1995 to 2012.3 • Japan’s Consumer Safety Investigation Commission recommended rooftop PV system inspections in a report citing 127 fires from 2008 to 2017.4

A Growing Concern

As of December 2021, there were approximately 375M PV connections in the U.S. and an estimated 3.5B PV connections worldwide. Each of these individual connectors represents a potential point of failure, but only a tiny fraction of them are regularly monitored. Fires in operating assets with faulty connectors are preventable, but only with the right inspection and testing techniques.

Inside a PV Connector

The inside of a PV connector is rarely seen. Many PV connectors are field-made, which means their two parts are pushed together in the field during installation. Once locked, opening a field-made connector permanently destroys it. PVEL's field testing team obtained the image shown to the right using an advanced lab testing technique called X-ray Computed Tomography, which yields a 3D image of the inside of the connector.

In order to operate properly, the male and female contacts of connectors must be correctly matched, fully inserted and correctly crimped as shown above.

Modern Connectors and Field Failures 

Push-fit connectors accelerated the growth of the solar industry in the early 2000s by simplifying PV system installation. The design allowed construction workers to make electrical connections in the field instead of licensed electricians

Unintended Consequences

As technology improved, the slow pace of development for connector standards and regulations led to confusion in the market and failures in the field. As a result, many solar installation professionals have received incorrect training that specifies: 1. Uncertified, generic tools can be used for installation. 2. MC4-compatible connector parts produced by any two different manufacturers can be paired. These are myths that cause field failures.

The Signs of Connector Failure

The obvious signs of failure are: loose or disconnected connectors; high temperatures; melted, discolored or cracked casings; arc faults and ground faults; fires. But these field observations are only the symptoms of deeper challenges: • Uneven, insufficient or improper surface contact on metal contacts. • High resistance due to soiling, corrosion or foreign particles. • Moisture or water ingress that creates alternate electrically conductive paths, typically resulting from a broken seal and/or separated connectors. • Material degradation due to environmental factors. The conditions described above arise when fundamental mistakes are made at the time of connector manufacturing, procurement or installation, or due to a natural catastrophe or force majeure event.

A mismatched MC4 and MC4-compatible connector in the field at a site with extensive connector failures.

Why Failures Happen: The Most Common Root Causes are Simple Mistakes

-Improper installation Contacts that are not inserted fully into housing is a common issue.

-Improper installation tools Uncertified tools may not meet product specifications and/ or damage components.

-Lack of training Proper torquing technique and the use of end caps are often overlooked.

-Mismatched connectors Design differences may prevent complete, watertight locking.

-Counterfeit connectors Untested, uncertified products may be unsafe and degrade quickly.

-Faulty Faulty materials Some polymeric materials degrade rapidly after contact with oil or sunscreen.materials Some polymeric mater

What Happens When Connectors Fail?

Some connector failures are worse than others. Catastrophic incidents that jeopardize safety and property are more likely to occur when faulty connectors continue operating in the field over time.

-Compromised Connectors Can Be Time Bombs

Connectors that are left unplugged and uncapped during construction are often exposed to moisture and foreign particulates, such as dirt or other organic matter. Without connector caps, the metal pins of the connectors will be exposed to moisture and begin to corrode. Then, once the connector is closed, the corrosion continues to propagate, increasing connector resistance until the connection eventually fails. These connectors can become time bombs waiting to ignite to the field. 

-Poor Sealing Causes Nuisance Tripping

When connectors are not properly sealed against the environment, current can leak to ground. Inverters have sensitive circuits to detect the isolation of the system from ground during start up. In PVEL and HelioVolta's experience, inverter nuisance tripping during periods of high humidity (e.g. from morning dew) is frequently traced back to the combined ground leakage current from many poorly sealed connectors. 

Connectors and Personal Safety

The safety of personnel and consumers cannot be overlooked in any discussion of connector failure. Silent, non-detected or non-flagged ground faults can be lethal for technicians and other personnel, as well as the customers of solar-powered businesses and homeowners with PV systems.

The Spectrum of Connector Failures

Initial symptoms of failure may go unnoticed, such as minor reductions in energy yield caused by resistive losses. The chart below describes the spectrum of failure modes and range of potential impacts for asset owners

 Field Observations of FailurePerformance Impacts
Commercial Impacts



 Visible signs of failure may or may not be apparent

• Disconnected, loose or connectors

 0.3% to 1% power loss •

Resistive losses may go unnoticed

 Up to a few thousand dollars per year in financial losses
Ground/ Arc Faults

 Compromised enclosures

• Melted connectors

• Sparks

• Frequent inverter tripping 

 Periodic downtime and/or inactive strings are possible

• Major underperformance and power losses can occur

 Up to a few thousand dollars per day in financial losses

• Safety risks to personnel

• Equipment damage


 Extremely hot connectors that ignite system components

• Explosions

• Destroyed equipment 

 System failure

• Total power loss

• Repairs may require extended system downtime

• Severe safety risks to staff and general public, for which asset owners may be legally liable

• Total or near-total financial losses possible due to property and equipment damage

• Business closures for repairs and restoration 

Analysis assumes the following initial conditions: 5 MW commercial project; $0.15 PPA rate; 1400 kWp/kWh production; 425W modules; 588 strings; 10 A module current; 42.5V module voltage; 1000 V string voltage. Connectors with resistance of 150mΩ affect 10% of the project. 1% of field made connectors are open, rendering six strings inactive

Diagnosing Connector Failure

There are many ways to make mistakes when creating a PV connector, but few ways to validate their quality after installation. 4 Assessing connector quality in the field is challenging. While these devices can safely be unplugged when they are not under load, they cannot be disassembled without compromising their integrity: assembly is irreversible. Visual inspection of the connector’s exterior can reveal some errors but it does not validate the quality of the internal connection

Failing Connectors are Hot

Compromised connectors have a higher resistance than properly made connectors. That resistance decreases energy yield and produces heat. As a result, high temperature is the primary warning sign of looming connector failure: • If major issues are present at the time of installation, thermal identifiers may be present when the system is commissioned. • When latent defects are present, thermal identifiers may not emerge until the system has operated for some time. Thermal imaging on the ground can identify latent connector reliability issues before they become catastrophic failures. However, drone thermal imaging does not adequately identify hot connectors because they are typically positioned underneath modules that hide their heat signatures.

Identifying Failures with Thermal Imaging

There are no specific standards for on-site thermal imaging of PV connectors, but HelioVolta’s data-driven approach has proven successful in the field. Their process establishes pass/ fail criteria that includes two categories: • Absolute temperature failure, which is defined according to manufacturer specifications, typically 85°C to 95°C. All connectors that display a temperature above this limit are considered failures. • Differential temperature failure, which is project-specific. Some connectors that operate below the threshold for absolute temperature failure will measure at higher temperatures than others at the site. These connectors still present performance and safety risks. The criteria for differential temperature failure is established using baseline average connectors temperatures at specific temperature and irradiance conditions. The threshold for failure is based on the deviation from that baseline average. 

The images above show differential temperature failures. One of the connectors in the bundle (left) has an operating temperature that is 15°C higher than the others, as indicated by the thermal image (right). 

The sample of failed connectors above melted due to high temperature operation in the field. PVEL removed the devices from the field for testing and root cause failure analysis.

Advanced Lab Testing for Root Cause Analysis

Determining the root cause of connector failure typically requires sophisticated destructive testing conducted in a laboratory setting. Neither thermal imaging nor visual inspection reveal the inner workings of connectors. PVEL recommends the following techniques for advanced analysis:

• X-ray computed tomography (XCT) to create a 3D image of the connector, including metal and plastic components.

• Scanning electron microscopy (SEM) and energydispersive x-ray spectroscopy (EDX) to identify metal corrosion and arcing biproducts.

• Cross-sectioning the connector at the position of the crimp to evaluate crimp quality.

• Subjecting connectors to accelerated stress testing in high temperature/humidity conditions and/or thermally cycling in a laboratory environment to accelerate failure of suspected bad connectors.

The above XCT cross-section images show the difference between a correct (left) and poor (right) connector crimp found by PVEL in an active PV installation.

Inside a Root Cause Failure Analysis

Connectors regularly melted and caught in fire in a >150 MW project in California. The owner contracted PVEL to conduct a root cause analysis that determined why the failures occurred and identified the EPC as the party at fault. PVEL evaluated 1,500 of the nearly 100,000 field-made connectors at the site with a combination of visual inspection, infrared thermography and XCT. Installation error was identified as the overarching root cause of connector failure:

• Critical connector installation errors were extensive, including under- and overtorqued nuts, poor placement, improper crimping, and improperly seated contacts.

• 40% of the connectors evaluated with XCT had installation issues, and 20% had incomplete insertion of the contact, which suggests issues are widespread throughout the site.

• Persistent inverter nuisance tripping based on insulation resistance faults could be due to the widespread poor sealing of connectors due to under-torqued back nuts. PVEL recommended further inspection and/or total replacement of all field-made connectors in the project due to significant installation errors

Inspecting Rooftop PV Systems

More than 70% of the commercial and industrial projects inspected by HelioVolta have serious connector issues. HelioVolta is usually contracted by the asset owner after a safety event occurs. Several trends have emerged: • Connectors can be difficult to locate and poor wire management is common. Inspectors often crawl on their knees with hand-held thermal cameras.

• Cross-mated connectors are frequently found on homerun cables. This classic problem usually occurs because modules come with a connector type that the EPC does not have readily on-hand.

• Poor installation practices are often to blame for failures. Connectors may be exposed to the elements, resting on roof membranes, have a tight bend radius, or poorly torqued backnuts, among other issues.

• Hot connectors are the most obvious indicator of underlying issues. These connectors have higher operating temperatures than other connectors installed on-site, which indicates a higher electrical resistance. Unfortunately, failure is only a matter of time for connectors that are time bombs. To prevent future safety issues, HelioVolta advises asset owners to:

• Ensure that connector quality assurance/control protocols are in place for construction and commissioning.

• Mandate proper field-made connector training for personnel.

• Include connector inspection requirements and pass/fail criteria in operations and maintenance contracts.

A single overheated connector caused this catastrophic failure. Per PVEL's testing, installation error is likely the root cause.

These XCT images show two poorly installed connectors. The top image reveals incomplete insertion and the left image zooms in on a channel for water ingress due to an undertorqued nut.

Drilling Down on Connector Inspection Techniques

Different types of connector inspections can reveal different issues. The table below describes the types of connector failure modes that can be identified through visual inspection, thermal imaging and advanced lab testing

Failure Mode
Root CauseFailure ModeVisual Inspection - Connected*Visual Inspection - Disconnected*Thermal ImagingAdvanced Lab Testing

Lack of Trainingor

Improper Installation Practices

irty contacts or contamination by foreign particlesNoYesSomewhat likelyYes
Corroded by exposure to water during installationNoYesSomewhat likelyYes

Contact not seated in housingNoYesvery likely Yes

Cross-threadedYEsYesNot likely Yes

Incorrect choice of contact for wire gauge or strand countNoNoLikelyYes

Incorrect choice of plastic housing for wire insulation outer dimensionNoNoLikelyYes

Connectors exposed to elementsYesYesNot LikelyNo

Wire nicks during strippingNoNosomewhat LikelyYes

Lost wires during strippingNoNosomewhat LikelyYes

Wires too bent going into connectorYesYesNot LikelyNo

Low point location (water dripping)YesYesNot LikelyNo

Not fully seated (plastic pins do not click)YesYesLikelyYes

Too much tensionYesYesLikelyNo
Counterfeit ProductsMany failure modes are possible due to lack of certifications and testing MaybeMaybeSomewhat LikelyMaybe
Improper ToolsImproper torqueMaybeYesNot LikelyYes
Bad crimpNoNoLikelyYes
Incorrect stripping lengthNoNoSomewhat LikelyYes
Mismatched PartsDisimilar contacts and couplers specificationsYesYesSomewhat LikelyYes

Faulty Materials

/ Manufacturing


Fast degradation of polymer materialsMaybeMaybeSomewhat LikelyMaybe
Propensity for fretting corrosionNoNoSomewhat LikelyYes

*Non-destructive visual inspection can be conducted on connectors that remain connected; i.e., the male and female parts are locked together. It can also be conducted on connectors that have been disconnected, so long as they are opened safely and are not under load. Removing the back nut and opening the plastic housing of a connector to inspect its interior will compromise it.

**Thermal imaging is presented by probability of detection because this technique can only identify issues that cause resistance rise to the point that the connector causes significant resistive losses and is close to failure. While thermal imaging does identify hot connectors, it typically does not reveal the specific issue or root cause of failure.

Insights from Non-Destructive Visual Inspection

During O&M inspection, thermal imaging is the primary tool for identifying PV connector issues. However, there are also visual cues that can identify the longer-term connector issues soon after commissioning, before they are apparent in a thermal scan. These cues are also helpful if irradiance conditions are below a minimum threshold for inspection. 

Connectors may be unconnected, loose, or improperly connected. If the connector is not pushed in all the way, the connection is not perfect and can lead to increased resistance over time.
Signs of overheating ("shine effect" or thermal deformation). Materials in connectors change appearance when they degrade due to operation outside of specified temperatures.
Cross-threaded back nuts. When torquing back nuts, threads can bite in the wrong channels, or crossthread. This can compromise the connector's watertight seal. 
Over-torqued back nuts. Torquing specifications vary by manufacturer and must be followed. Over-torquing compromises the seal and integrity of the connector body.
Under-torqued back nuts.* This error is usually caused by skipping a step or using plastic installation wrenches. Some manufacturers specify the number of visible threads. 
Inconsistent back nut visible threads. This can indicate a mistake because all connectors in a single array are usually made with the same tools and conditions. They should match
Exposure to sunlight and water. Connectors should be protected from moisture and direct UV rays as they will degrade the material over time. This is often manufacturer-specified.
Insufficient bend radius or too much tension on the leads. These conditions can compromise the integrity of the seal at the back nut or even damage the internal crimp.
Crossmated connectors. The term "compatible" refers to the shape of the termination and does not guarantee safety. Parts from different brands are not usually tested/certified together

Additional Notes

• Connectors should not be located at a low point in cabling. This allows water to seep along their cables and interact with the backing nut. If the back nut seal is compromised, moisture ingress may create an alternate path for electron flow.

• Exposure to mechanical interference can also damage connectors and lead to electrical problems. For example, connectors may be pinched due to tracker movements or affected by vibrations from heating and cooling systems

The Solar Industry's Most Common Torquing Myth

It is a common misconception that the plastic wrenches used for installation slip when there is sufficient torque on the back nut. This is false. Plastic wrenches may be used to initially make the connection, but then the nut must immediately be torqued properly with the manufacturer-approved torque wrench. Torque on the back nut cannot be checked post-commissioning. It is imperative that asset owners are confident in their installation teams and the quality of the connectors in their projects

Best Practices to Ensure Connector Reliability 

Connector failure creates safety risks and causes underperformance in PV assets, but these negative outcomes are avoidable. Take action throughout the project lifecycle to prevent connector failure by following these five steps:

 1. Specify Connectors

Specify certified connectors by manufacturer and exact product type in both module supply agreements and EPC contracts. Mandate and validate product authenticity to avoid counterfeits.

2. Install the Right Connectors

Do not allow cross-mated connectors unless they are tested and certified together as a single component. Obtain new connectors from module manufacturers if necessary. 

3. Install Connectors Properly

Use manufacturer-provided crimping tools. String modules immediately to prevent environmental exposure and use end caps when necessary. Document the status and location of all field-made connectors at the time of installation. 

4. Validate Connector Installation

Include third-party as-built inspection and verification requirements in EPC contracts. Ensure connectors are covered under EPC warranties.

5. Regularly Inspect Connectors

Periodically inspect connectors throughout the project lifecycle using SolarGrade software and an acceptable quality level (AQL) sampling approach. Always conduct inspections after force majeure events because they can compromise the integrity of well-made connectors

Next Steps

Connectors are not complicated when they are installed correctly and functioning properly – but when they fail, the ramifications can be enormous. While field inspections can prevent costly fire incidents, the root causes of connector failure are more fundamental and must be addressed

Standardize Connector Design

The industry lacks a clear, consistent standard for connector design. MC4 has emerged as the de facto connector standard, but it is a proprietary design. Product marketing that promotes “MC4 compatibility” has resulted in widespread and dangerous assumptions about connector intermatability. The best way to prevent compatibility-related failures is to standardize connector design. 

Improve Installer Training

Solar training programs do not always provide accurate guidance for connectors. In our experience, problematic practices that lead directly to connector failure are widespread and deeply ingrained. A concerted industry-wide effort to improve training programs is necessary, especially as the solar installation workforce grows. The best way to prevent installation-related failures is to require robust, accurate installer training.

Conduct More Research

The industry will benefit from new tools and more test methods that enable frequent, low-cost connector inspections on a regular basis. The humble PV connector should be prioritized by researchers precisely because it is easy to overlook in the field. With the right technology, connector inspections can become a standard operating procedure for solar PV systems instead of a reactive response to obvious signs of failure. We urge those interested in joining PVEL and HelioVolta’s research and development efforts to reach out. 

Amphenol   Connector

MC4 & MC4-Evo 2 connectors
Maximum Isolated Voltage 6000V
1500 V, 100 A and 10 mm²/6
Water and Wheather Proof

Maxim System Voltage 1500V

 IEC 61984:2008, UL 1977
Maximum Pulsa Voltage 8000V
IP67 Set
ClassII, 30Amper

Max System Voltage
Max DC Current
Cable Size
0-1500V DC
Custom ,Gümrük Tariffe GTIP Number:8536690000
4 mm²  cable.UTXCFA4AM(Female-Positive-Mc4) +  UTXCMA4AM(Male Negative  MC4) Set
6 mm²  cable.UTXCFA6AM(Female-Positive-Mc4) +  UTXCMA6AM(Male Negative  MC4) Set
The new UTX™ from Amphenol Industrial Solar Technologies (AIST) is a robust DC connector triplecertified to UL 6703 1500V, EN50521 1500V (Class A), and JET 1500V specifications, making it currently the only connector available for usage in all major global PV markets.
The UTX™ is an evolution of AIST’s wellknown H4 connector, with the same solar industrystandard mating compatibility, Amphenol’s low resistance RADSOK® contact technology, ability to accept wire gauges from 14AWG/2.5mm² to 8 AWG/10mm², and an IP68 rating. An enhancement over the H4, is the UTX™’s ratcheting gland back nut, which prevents backspin once the nut is tightened. The amount and characteristics of materials used to make the UTX™ have resulted in a more efficient and optimized design. By using gland nuts, environmental gaskets, wire-retention collets, and contacts that accept multiple wire gauges, part count goes down and cost-savings goes up. AIST’s UTX™ connector is the ideal choice for all PV modules and installations around the world.

Amphenol Industrial now offers the H4 Panel Connector, a panel mount photovoltaic (PV) connector featuring RADSOK technology. This new connector offers higher current ratings and lower contact resistance resulting in lower power losses and is compatible with standard industry connectors, including Amphenol's H4 line, for easy integration.
Amphenol's new H4 Panel Connector was designed for applications that use solar inverters and combiner boxes. The H4 Panel Connector is dual-rated for UL and TÜV. The connector meets NEC 2008 requirements without the need for extra locking collars or locking sleeves and is available in three different gauges including 14 AWG rated at 36A, 12 AWG rated at 45A and 10 AWG rated at 52A. This new RoHS compliant H4 Panel Connector is ready for field assembly and is UV and Ozone resistan
• UL 1500V DC, TÜV 1500V DC approved
• Meets all 2008/2011 NEC handbook requirements
• Quick and easy secure snap lock mating, per 2014 NEC
 handbook, paragraph 690.33(C)
• Simple unlocking tool meets NEC requirements
• Long-term UV resistance
• RoHS compliant
• Low contact resistance means low loss
Amphenol Industrial Solar Technologies (AIST) offers products and solutions for all segments of the solar electric system. AIST understands the need for efficient (low loss) power transfer, highly reliable, and cost effective solutions that are required to be competitive in this industry. We can provide panel manufacturers, installers, and OEM’s with connectivity products for both thin film and crystalline silicon technologies. Amphenol has a broad range of technologies to help minimize the cost of inverters and power conditioners. Amphenol Industrial can help you power the planet with the sun. The H4 PV Panel Mount Connector is just one product of the many solar interconnect solutions AIST has to offer. For more information, please visit our website:

Amphenol Industrial RADSOK® Helios H4 Solar Connectors provide solutions for all segments of the solar electric system while featuring a 52A rating. The H4 connectors provide efficient, low-loss power transfer through precision machined contacts utilizing RADSOK technology. The H4 Series offers high reliability for both thin-film and crystalline silicon technologies. A quick, easy, and safe NEC 2008-compliant locking system with secure snap-lock mating makes the H4 one of the most advanced solar connectors available. The Helios H4 series meets NEC 2008 standards as-is, with no additional components needed. With a 25-year UV and ozone resistance, the connectors meet waterproof IP67 standards and withstand hydrolysis, oil, chemicals, abrasion, corrosion, and extreme temperature. 
Amphenol Industrial H4 Solar Connectors are compatible with one another and ready for field assembly with no small parts. The RoHS-compliant connectors meet UL, TUV, IEC/CEI, NEC, and DIN V standards. The field-installable PV variants accept 8AWG wire, TUV-certified to 1500V, UL approved for use up to 1000V, and meet IEC EN 50521 requirements. The stamped and formed contact option features a wide back cap to accommodate bigger wire for the 1000V rating. This option is ideal for use in large-scale PV installations as well as 1000V PV modules.

MC4 Electrical Features
MC4 Wire Size mm² 6
MC4 Type UTX
MC4 Maximum Current Amper-TUV 45
MC4 Maximum Voltage-Volt 1500
MC4 Test Voltage-Volt-50Hz 8000
MC4 Impulse Voltage-Volt 16000
MC4 Over Voltage Category-Volt III
Number of Brunch 1
MC4 Mechanical Features
MC4 Protection Class Class II
MC4 Application Class Class B
MC4 Flammability Class UL94-V0
MC4 Temperature range -40 ºC ~ + 85 ºC
MC4 Upper limit temperature 105 ºC
Maximum Humidty 5% -95%
MC4 Contact material Copper Tin Plated
MC4 Insulation material PPE/PA
MC4 Lock Mode Self Locking+Salmastr
MC4 Insertion force ≤90 N
MC4 Withdrawal force ≥ 310 N
MC4 Certificates ISO 9001ISO 14001, ROHS TÜV-Rheinland sertifikası, R503 88083 IEC 62852 TÜV-Rheinland UL 6703 CSA , 250535 UL 6703 CQC , E339277 JET
MC4 Water Protection IP68

Write a review

Note: HTML is not translated!
    Bad           Good
Whatsapp Whatsapp Whatsapp Whatsapp